100mm Height Single Layered Sintered Filter Element With Stainless Steel
JUMAO manufactures a range of industry standard stainless steel filter cartridges including Single Layered Sintered Filter Element suitable for use in a wide range of industries, including petrochemical.
The robustness of design, that is provided by a fully welded metallic element or cartridge, is required to resist deterioration in harsh operating environments where the fluids present are aggressive, high temperatures are experienced or where the operating differential pressures are high.
For some filtration applications, the use of a conventional disposable Single Layered Sintered Filter Element may simply be environmentally unacceptable and the use of a re-cleanable cartridge will often give more cost effective filtration.
Feature of Single Layered Sintered Filter Element
· High mechanical strength and pressure tolerance.
· Good corrosion resistance, excellent durability.
· Stable pore shapes, high permeability.
· High dirt-holding capacity.
· Wide service temperature, ranging from -200 °C to 1000 °C.
· It can be back washed easily, which prolongs service life.
Specification of Single Layered Sintered Filter Element
· Standard material: SUS 316 L, SUS 304, 316, 304, 317 L, 904 L, 321, titanium, other alloys are also available.
· Filter rating: 0.2 micron to 300 microns.
· Standard outer diameter: 64 mm.
· Other outer diameter: 30 mm, 40 mm, 50 mm, 60 mm, 64 mm, 70 mm, 80 mm, 350 mm.
· Standard inner diameter: 28 mm.
· Length: 10" (254 mm), 20" (508 mm), 30" (762 mm), 40" (1016 mm), 60" (1524 mm).
· Fittings: Double open end, single open end, double O-rings.
Material of Wedge Wire Screen Filter Element | Stainless Steel 304,304L,316,316L,904L,Duplex Steel 2205,2507,Hastelloy C276 |
applications for Wedge Wire Screen Filter Element | Chemical
|
Specifications of Wedge Wire Screen Filter Element | 1.Wedge wire Width: 1.50mm, 1.80mm, 2.30mm, 3.00mm, 3.70mm, 3.30mm. Height: 2.20mm, 2.50mm, 2.70mm, 3.60mm, 4.30mm 4.70mm, 5.60mm, 6.30mm, 7.00mm.
2.Support rod: Round wire: 2.50 - 5.0mm.
3.Slot opening: 0.05mm, 0.08mm, 0.10mm, 0.15mm, 0.2mm, 0.3mm, 0.6mm, etc. 4.Round wire diameter: 2.50 - 5.0mm. 5.Diameter: 20 - 1000mm. 6.Length: up to 6 meters.
|