339-10MPa sinter-HIP furnace,which is used for debinding of high-performance hard alloy materials

Main application:
It is used for debinding of high-performance hard alloy materials (it can realize the process of positive and negative pressure dewaxing, and the forming agent is paraffin, PEG or rubber), hydrogen discharge, vacuum sintering, partial pressure sintering, pressure sintering, rapid cooling and other batch production operations and research and development operations in the laboratory.

Total requirements :

The cemented carbide pressure sinter-HIP furnace is single chamber, horizontal and periodic heating. It adopts low voltage and large current graphite electric heating element for heating. It has several heating units, each of which controls the temperature separately.It has debinding function,which can achieve the positive and negative pressure of two removal processes, molding agent for paraffin, PEG or rubber).Moreover,it also can realize hydrogen discharge, vacuum sintering, partial pressure sintering, sinter-HIP and rapid cooling functions. The whole process by computer automation control, monitoring, tracking, fault self-diagnosis simulation display and record.
The sinter-HIP furnace shall include control system, heating system, debinding system (positive and negative pressure debinding), vacuum system, partial pressure sintering system, pressure sintering system, cooling water system, rapid cooling system, auxiliary system and safety system, etc., with graphite inner structure built into the insulation cylinder.On the whole, it must meet the strict requirements of temperature uniformity and atmosphere uniformity in the sintering process of high performance cemented carbide.Furnace structure design is advanced and reasonable, easy to operate and maintain.The main supporting components (control components, sensors, graphite heating element, thermocouple, main control valve, vacuum pump, etc.) have the international advanced level, can adapt to the long-term, stable, reliable mass production requirements.At the same time, the equipment should also meet the national requirements of energy conservation and environmental protection.

After sales:

1.Installation, Commissioning And Acceptance

We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.

The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.

2.Training

When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)

3. Warranty period

The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.

Note:

We are a professional manufacturer of powder metallurgy sintering furnaces. Custom design is available according to customer’s requirements. Please offer us the sintered material, size of sintered piece, max. temperature, heating zone dimensions, vacuum level and other special requirements when making inquiries. We will offer professional proposal and solutions based on your requirements.

Quality assurance and service:
1. Our company guarantees that all materials and purchased components meet the national technical quality standards.
2. Within one year from the date of acceptance of the equipment, if there is any quality problem caused by the design or manufacture of the equipment, our company will carry out free maintenance and bear the maintenance cost.If the equipment exceeds the warranty period or is damaged due to human error or force majeure (such as natural disaster), our company will actively provide high-quality paid service.