Vacuum sintering furnace equipped with secondary pump unit(Roots pump,backing pump)

Equipment function:
Automatic leak detection function
Vacuum sintering function
Vacuum cooling function
Electrified cooling and insulation function
Rapid cooling function(Put a heat exchanger inside)
Fully automatic control function
Safety interlock function
Break point reheating function
Wireless remote diagnostic function

Design standards:
The vacuum sintering furnace is a single chamber and double door horizontal and periodic heating structure,which is designed for easy handling and maintenance, the whole process is controlled automatically.It can realize full load continuous operation, 300 furnace times/year or 300 working days/year.It uses graphite element resistance heating (low voltage, high current) .In addition, there are multiple heating units, each of which controls the temperature separately.It equipped with fully automatic control function and safety interlock function.The whole process is automatically controlled, monitored, tracked and recorded by computer.The PLC, industrial computer (PC) control to realize the whole process of one-key start, real-time dynamic monitoring, computer will save temperature, pressure, vacuum and other parameters ,alarm interlocking is safe and reliable.

General equipment requirements:
It is mainly used for vacuum sintering, vacuum cooling and rapid cooling of stainless steel materials.It can meet the strict requirements for the uniformity of furnace temperature and atmosphere in the sintering process, and the furnace body structure design is advanced and reasonable, which is convenient for operation and maintenance.The main supporting components (control components, sensors, graphite heating element, thermocouple, main control valve, vacuum pump, etc.) have the international advanced level, can adapt to the long-term, stable, reliable mass production requirements.At the same time, the equipment meets the national requirements of energy conservation and environmental protection.

Technical parameters of equipment

After-sales service
The warranty period of the equipment is 12 months.The warranty period shall start from the date when the supplier is qualified in installation and commissioning.After the equipment failure occurs,the after-sales service personnel shall put forward a solution within 2 hours after receiving the notice from the buyer,and those in urgent need of on-site treatment shall arrive at the site within 12 hours,and continuous repair shall be carried out until the fault is removed and the equipment completely returns to normal.
During the warranty period,the seller shall replace or repair the equipment free of charge for any loss or damage caused by the quality of the equipment itself.Non - quality problems,due to the demander negligence or improper operation caused by the fault.The buyer can contact the supplier,and the supplier can provide paid technical support.