IEC 60335-1 Torque Screwdriver & Torque Gauge SPE-4 Electronic Test Equipment
Product information:
This torque screwdriver and torque gauge is required by IEC 60335-1 clause 26, clause 28, IEC60598-1:2014 +AMD1:2017 clause 4.12.1, IEC 60065:2014 clause 15.4.3 b), 12.7.3.3, IEC60950.1, etc.
LED display, clear and the accuracy is 0.1.
When the torque reaches, the warning light is lit on the right side of the torque meter.
20-400 cN-m (10-200 cN-m optional)
Including one set of bit tips (more than 70 pcs)
cN.m, in-lb, kg-cm three units are switchable
Product structure:
1. Quick change of screwdriver | 7. Buzzer |
2. Communication socket | 8. Marking of calibration points |
3. LCD display screen | 9. Button |
4. LED warning light | 10. Torque display value |
5. Non-slip grip | 11. Unit display |
6. Battery cover | 12. P (peak mode) / T (follow mode) |
Parameters:
Model | SPE-2 (Optional) | SPE-4 | ||
AN | BN | AN | BN | |
Torque accuracy | Forward: ±1% Reverse: ±2% | Forward: ±2% Reverse: ±3% | Forward: ±1% Reverse: ±2% | Forward: ±2% Reverse: ±3% |
Ratchet square head size (inches) | 1/4 | 1/4 |
Torque measuring range | 10-200 cN-m 0.88-17.7 in-lb 1.02-20.41 kg-cm | 20-400 cN-m 1.77-35.39 in-lb 2.04-40.82 kg-cm |
Resolution | 0.1 cN-m 0.01 in-lb 0.01 kg-cm | |
Communication and transformation function | NO | |
Units | cN-m, in-lb, kg-cm | |
Operation mode | Peak hold (P)/ Follow mode (T) | |
Battery | AAA*1 |
Batter care:
When you need to travel long distances or in cold regions, please prepare spare batteries.
Do not mix batteries of different brands, and do not mix old and new batteries.
Sweets, water, oil, etc. will hinder the contact of the battery electrodes, please wipe the battery clean before putting in the screwdriver.
Please dispose of used batteries at designated recycle places. Do not dispose of batteries in fire
If the screwdriver will not be used for a long time, please take out the battery.