MachineU > China Products > Home Appliance > Personal Care & Beauty Appliances > Oral Care Appliances > Electric Toothbrush
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Specifications
Brand Name :
Sinuo
Model Number :
SNQC1008
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Payment Terms :
T/T
Supply Ability :
10 Sets / Month
Delivery Time :
30 Days
Packaging Details :
Plywood Case
Operation Method :
Manually
Impact Weight :
0.25KG*4
Impact Energy :
1～6J
Hammer Anvil :
Ф50mm
Impact Angle :
25°, 35°, 36°, 42°, 47°, 52°
X/Y/Z Axis Stroke :
Movable more than 300 mm
Pendulum Material :
Steel pipe
Pendulum Length :
1M
Description


Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1

Product Introduction For Accessories Mechanical Strength Impact Test Apparatus:
The test equipment is designed and manufactured according to IEC60309-1: 2012 clause 24.2 and figure 7, etc. It is used to verify the mechanical strength of the vehicle plugs, socket-outlets and couplers accessories.
The experimental principle is that after the gravitational potential energy is converted into kinetic energy, the equivalent mass impact weights will be freely released at a certain height to achieve the required impact energy.
The mounting bracket can be adjusted in three-axis, front and back, up and down, and left and right, which has strong applicability.
Technical Parameters For Accessories Mechanical Strength Impact Test Apparatus:
Operation Method Manual operation
Impact Weight 50*16mm; 304# stainless steel 0.25Kg impact weights
Combined Impact Weight

0.5Kg (low energy) (2 pieces of 0.25Kg weights),
1Kg (high energy) (4 pieces of 0.25Kg weights)
Impact Energy 1～6J (The impact weights can be interchangeable)
Hammer Anvil Ф50 mm
Impact Angle 25°, 35°, 36°, 42°, 47°, 52°
Pendulum Support Structure Can move back and forth, left and right, up and do and can rotate 90°
Pendulum Material Steel pipe with outer diameter of 10 mm and wall thickness of 1.0 mm
Pendulum Length 1m, from the pivot to the center of the impact element
Mounting Plate 8mm thick stainless-steel plate, made according to the customer's specified aperture and position, default one set
Impact Height 776mm, 833mm
Vertical Backboard Material Plywood
X/Y/Z Axis Stroke Movable range is greater than 300 mm

Counterweight and impact energy For Accessories Mechanical Strength Impact Test Apparatus:


Choose the counterweight and drop angle according to the impact energy. If the impact energy is ≤2J, add two counterweights at the upper hole position and with one weight on each side, the total mass is 0.5kg; if the impact energy is >2J, add two more counterweights at the lower hole position and with two weights on each side, the total mass is 1Kg.


Counterweights of the impact energy and the impact angle are shown in following Table:

Impact energy(J) Counterweights(Kg) Release angle
1 0.5 25°
2 0.5 35°
3 1 36°
4 1 42°
5 1 47°
6 1 52°
Notice For Accessories Mechanical Strength Impact Test Apparatus:

1 No-load impact is strictly prohibited for the device, that is, there should be objects during impacting.

2 The screw must be frequently lubricated to prevent rust.

3 Required environmental conditions: temperature 5℃~35℃, humidity 45%~75%.

Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Product tags

retractable test leads

,

electricl test equipment

,

impact test equipment stevenson
Send your message to this supplier
Send Now

Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1

Ask Latest Price
Watch Video
Product Detail
Brand Name :
Sinuo
Model Number :
SNQC1008
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Contact Supplier
video
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1
Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1

Sinuo Testing Equipment Co. , Limited

Verified Supplier
7 Years
guangdong, guangzhou
Business Type :
Manufacturer
Main Products :
Electrical Appliance Testing Equipment, Energy Efficiency Lab, Vehicle Testing Equipment
Total Annual :
800000-1500000
Employee Number :
30~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Vehicle Testing Equipment
MachineU China Products Home Appliance Personal Care & Beauty Appliances Oral Care Appliances Electric Toothbrush
Contact Supplier
Submit Requirement