Mechanical Endurance Test Machine

Test Station

Single, can be customized

Electrical Control Method

PLC intelligent integrated control, with color humanized touch screen

Drive Mode

Servo motor drive

Sample Clamping Method

Mechanical clamping, clamping point position can be adjusted along the three axis fixture

Linear Stroke

0-100mm, can be preset (the spacing between test plug and test socket≥ 50mm)

Conduction Time

0-99.9s, can be preset (electrical contact should be maintained no more than 4s, no less than 2s)

Speed of Insertion and Separation

0-0.85m/s can be preset,default(0.8±0.1)m/s

Test Cycles

0 ~ 999999 cycles can be preset (one trip is the insertion or withdrawal of the plug or vehicle connector and its matching accessories). A loop consists of two strokes, one for insertion and one for exit.

Test Frequency

0-10 cycles/min,can be preset(3.75cycles/min=7.5 stoke/min)

Load Cabinet

Channel

1 Channel

Digital voltmeter

0～300V, accuracy ±0.5%

Digital ammeter

0～82A, accuracy ±0.5%

Digital display power meter

0～24KW, accuracy ±0.5%

Digital display power factor meter

0.2～0.999, accuracy ±0.5%

Load mode

Resistive, inductive, capacitive three in one, switchable

Capacitive load

70uf, 140uf, 7.3uf can be switchable

Load output mode

Each power (continuous) / interval power can be switchable

Timer

0～9999 times, can be preset

Load power capacity

Single 24KVA

Upper limit of output current

82A, when it exceeds 82a, it will cut off automatically

General

Test Contents

Breaking Capacity Test of Electrical Coupler / Charging Interface

Electrical coupler / charging interface normal service life test

Detection Function

An open circuit alarm can be realized during testing under load, and the cycles can be recorded real in time.

Safety Protection

Ground protection, short circuit protection