IEC 60065 Figure 2C Telecom Test Probe
Product information:
The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 Figure 3 and UL 6500 figure B.1 and etc.
It is used to check whether the bare parts of TNV circuits of information technology equipment have sufficient protection.
There is a M6 thread on the end of the handle, through where the test probe can be connected with a force gauge to achieve required force.
Technical Parameters:
Probe Length | 80 mm |
Probe End Radius | R6 mm |
Probe Diameter | Φ12 mm |
Baffle Diameter of Handle | Φ 50 mm |
Probe material | Stainless steel |
Handle material | Nylon |
Sinuohave a full range of test probes according to different standards, and also can offer customized service.