Specifications
Brand Name :
Sinuo
Model Number :
SN2112
Certification :
Calibration Certificate(cost additional )
Place of Origin :
China
MOQ :
1 Set
Price :
Negotiable
Payment Terms :
L/C, T/T
Supply Ability :
20 Sets / Month
Delivery Time :
30 days
Packaging Details :
Standard Exporting Plywood Case
Standard & Clause :
IEC60884 Clause 12.3.12 figure 12
Test Sample :
Screwless Terminals
Deflection Angle :
0-360°
Deflection Force :
0.25N, 0.5N, 1.0N
Deflection Direction :
12 directions
Test Current :
Max. 100A
Description

IEC 60884-1 Figure 12 Screwless Terminals Deflection and Voltage Drop Test Device

Standard: IEC60884-1 clause 12.3.12, Figure 12.

Application: It is used to check screwless terminals shall be so designed that the connected rigid solid conductor remains clamped, even when it has been deflected during normal installation, for example, during mounting in a box, and the deflecting stress is transferred to the clamping unit.

Test sample: Plugs and socket-outlets screwless terminals.

Technical Parameters:

Parameters Name Parameter Data
Power supply Match client's local power supply conditions
Deflection angle 0-360°
Deflection direction In any of the 12 directions differing from each other by 30°±3°
Deflection force 0.25N, 0.5N, 1.0N
Force applied direction Perpendicular to the undeflected conductor
Test current Max.100A
Sample installation:
1. Two insulation layer peeled solid conductors (about 150 mm) are separately inserted into both ends of the screwless terminals, shown as following:

2. Placed the screwless terminals into the fixture, the perpendicular of the conductor should be coincided with the center of the base. The upper conductor passes through the holes of the force plate, the lower conductor should not touch the floor , then clamp the terminal parts.
3. Loose the fastening handle of the support column and move the crossbar up and down, so that the distance from the end of the terminal to the force plate is 100 mm. The crossbar must be kept horizontal.

4. The red clip of the current output of the voltage drop tester is clamped on the upper conductor, and the red clip of the voltage drop measurement input is clamped in the position near the terminal, then hang on the weight.

5. clamped on the lower conductor, and the black clip of the voltage drop measurement input is clamped in the position near the terminal.

6. Rotate the base turntable, each rotation is 30 °, the starting point should be where the conductor in a natural state.

Send your message to this supplier
Send Now

Max. 100A Switch Life Tester IEC 60884-1 Figure 12 Screwless Terminals Deflection And Voltage Drop Test Device

Ask Latest Price
Brand Name :
Sinuo
Model Number :
SN2112
Certification :
Calibration Certificate(cost additional )
Place of Origin :
China
MOQ :
1 Set
Price :
Negotiable
Contact Supplier
Max. 100A Switch Life Tester IEC 60884-1 Figure 12 Screwless Terminals Deflection And Voltage Drop Test Device
Max. 100A Switch Life Tester IEC 60884-1 Figure 12 Screwless Terminals Deflection And Voltage Drop Test Device
Max. 100A Switch Life Tester IEC 60884-1 Figure 12 Screwless Terminals Deflection And Voltage Drop Test Device
Max. 100A Switch Life Tester IEC 60884-1 Figure 12 Screwless Terminals Deflection And Voltage Drop Test Device

Sinuo Testing Equipment Co. , Limited

Verified Supplier
6 Years
guangdong, guangzhou
Business Type :
Manufacturer
Total Annual :
800000-1500000
Employee Number :
30~50
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement