IEC 60884-1 Figure 8 Compression Resistance Performance Tester For Plug 300N Single Working Station
Standard: IEC 60884-1 2013 clause 10.1, 24.5 and figure 8
Application: This device is use for testing the compression resistance performance of plug, check whether the mechanical strength of plug comply with standard requirements.
Test sample: Plugs
Feature: This device applying compression force 300N by weights. The temperature of the pressure plate, of the base and of the specimens being 23±2℃, compress the plug in two position show as figure 8a) and 8b), each position for 1min.
Parameters:
Item | Parameters |
Model | SN2108 |
Standard | IEC60884 clause 10.1, 24.5 and figure 8 |
Weights | 300N (pile up with 2 150N weights) |
Station | 1 station |
Operation | manual |
Test time | 1min |
Material | Stainless Steel |
Using temperature | 23±2℃ |
Test method:
The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2) ℃ and the force applied being 300 N.
The specimens are first placed in position a), as shown in figure 8, and the force is applied for 1 min. They are then placed in position b), as shown in figure 8, and again subjected to the force for 1 min.
The specimens are removed from the test apparatus and after 15 min they shall show no damage within the meaning of this standard.
Notice:
1. Please do not damage the appliance shape (such as scratching, bending, etc.).
2. Prevented from dust and moisture environment, in order to avoid the oxidation to affect the dimensional accuracy.