MachineU > China Products > Electrical Equipment & Supplies > Industrial Controls > Other Electrical Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
Specifications
Brand Name :
Sinuo
Model Number :
SN2210-2
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Negotiable
Payment Terms :
L/C, T/T
Supply Ability :
60 Sets Per Month
Delivery Time :
3~5 Days
Packaging Details :
Carton Box
Applied Standard :
IEC 62368-1
Applied Clause :
V.1.2 and Figure V.2
Baffle Material :
Nylon
Probe Material :
Stainless steel
Force :
Can be customized
Accessory :
M6 thread and banana clip
Description

IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

Product information:

The test finger probe B is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for household and similar electrical appliances’ enclosure against electric shock test, an essential lab tool for the quality inspection departments and research institutions to detect relevant household appliances product safety performance.

Techincal Parameters:

Parameters /Model SN2210-2

SN2210-2A

(Optional)

SN2210-2B

(Optional)

SN2210-2T

(Optional)
Applied Standard

IEC 62368-1

figure V.2

 IEC60335-1 IEC60335-2-14 IEC60529
Name Standard test finger Circular baffle test finger Large baffle test finger Standard test finger with force
1 30±0.2 30±0.2 30±0.2 30±0.2
2 60±0.2 60±0.2 60±0.2 60±0.2
3 80±0.2 80±0.2 100±0.2 80±0.2
4 180±0.2 180±0.2 ---- 180±0.2
5 R2±0.05 R2±0.05 R2±0.05 R2±0.05
6 S4±0.05 S4±0.05 S4±0.05 S4±0.05
7 37o 0 -10’ 37o 0 -10’ 37o 0 -10’ 37o 0 -10’
8 14 o 0 -10’ 14 o 0 -10’ 14 o 0 -10’ 14 o 0 -10’
9 Ф12 0 -0.05 Ф12 0 -0.05 Ф12 0 -0.05 Ф12 0 -0.05
10 Ф50 Ф50 ---- Ф50
11 20±0.2 ---- ---- 20±0.2
12 Ф75±0.2 Ф75±0.2 Ф125±0.2 Ф75±0.2
13 5±0.5 5±0.5 ---- 5±0.5
14 ---- ---- ---- 10-30N force

Details:

1. The dimensions are made according to IEC 61032 figure 2.

2. The finger probe material: stainless steel.

3. The baffle and handle material: nylon.

4. The end of the handle with a M6 thread hole, which is used for connecting with a force gauge to achieve required force value.

5. It is equipped with a cable and an alligator clip, which is used for connecting with anti-shock probe experiment device to verify whether the appliance’s enclosure against electric shock.

Operation Steps:

1. Please refer to relative standard requirements, take IEC 60335-1 clause 8.1.1 as an example: Test probe B of IEC 61032 is applied with a force not exceeding 1N, the appliance being in every possible position except that appliance normally used on the floor and having a mass exceeding 40 kg are not tilted. Through openings, the test probe is applied to any depth that the prone will permit and is rotated or angled before, during and after insertion to any position. If the opening does not allow the entry of the probe, the force on the probe in the straight position is increased to 20 N. If the probe then enters the opening, the test is repeated with the probe in the angled position. It shall not be possible to touch live parts or live parts protected only by lacquer, enamel, ordinary paper, cotton, oxide film, beads, or sealing compound except self-hardening resins, with the probe.

2. If the test requires applying the test probe B with specific force, it needs to work with a force gauge. Please screw the force gauge connector into the M6 thread hole on the end of the handle.

3. For verifying whether LIVE PARTS touched, it requires working with an anti-shock probe experiment device: it is connected to the anti-shock probe experiment device (40V-50V), then operator processes the test according to the relative standard, the buzzer ringing means electric shock prompted.

Send your message to this supplier
Send Now

IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

Ask Latest Price
Product Detail
Brand Name :
Sinuo
Model Number :
SN2210-2
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Negotiable
Contact Supplier
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

Sinuo Testing Equipment Co. , Limited

Verified Supplier
6 Years
guangdong, guangzhou
Business Type :
Manufacturer
Main Products :
Electrical Appliance Testing Equipment, Energy Efficiency Lab, Vehicle Testing Equipment
Total Annual :
800000-1500000
Employee Number :
30~50
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Electrical Appliance Testing Equipment
MachineU China Products Electrical Equipment & Supplies Industrial Controls Other Electrical Equipment
Contact Supplier
Submit Requirement