Specifications
Brand Name :
Sinuo
Model Number :
SN446B
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Payment Terms :
L/C, T/T, Western Union, MoneyGram
Supply Ability :
100 Sets Per Month
Delivery Time :
3 Days
Packaging Details :
Carton Box
Applied Standard :
IEC 60529:2013
Spray Nozzle Material :
Brass
Spray Nozzle Outer Diameter :
Ф102mm
Spray Nozzle Spherical Diameter :
SФ75.5mm
Test Flow :
10L/min±5%
Measuring Range :
8L/min ~120L/min, digital
Moving Shield :
Made of aluminum, detachable
IP Code :
IPX3/4
Brand name :
Sinuo
Warranty time :
One year
Description

IEC 60529 Hand-held IPX3 And IPX 4 Spray Nozzle With Digital Flowmeter

Overview:

It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4, Figure 5.

The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.

Technical Parameters:

Parameters of Spray Nozzle Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch, total 121 holes of Ф0.5mm, made of brass.
Water Flow 10L/min±5% adjustable by flow meter (flow meter is not included in this item, should be prepared by user)
Pressure 50~150Kpa, the pressure gauge measuring range: 0~0.25Mpa
Moving Shield

Made of aluminum, can be detachable

Note: the aluminum moving shield is easy to deform, pay attention during use

Structure:

This device is manufactured according IEC 60529 figure 5, with a digital flowmeter and a pressure gauge on the handle, it can achieve IPX3 / IPX4 hand-held spraying test by connecting water pipe (water pipe should be prepared by user).

It ensures that the water spraying and splashing speed reaches the standard required value by controlling the water supply flow, make the enclosure of the specimen to be splashed in all directions.

Operation Steps:

Install the water flow meter, water pipe and spray nozzle as above picture shown, and then adjust the handle to open the valve to adjust the water flow to be (10 ± 5%) L / min, and check whether the pressure gauge shows the pressure in the range of 50-150KPa. If the water flow is less than 10 liters, then a booster pump should be installed, please refer to the blow picture.

Waterproof rating for IPX3 test: According to IEC60529 Figure 5, adjust the moving shield to be 30 °(moving to the fourth circle of holes counting from outside to inside).

Waterproof rating IPX4 test: Please remove the moving shield to full open to not cover any holes, in order to make the sample can be splashed in all directions.

Send your message to this supplier
Send Now

IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter

Ask Latest Price
Brand Name :
Sinuo
Model Number :
SN446B
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Contact Supplier
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter

Sinuo Testing Equipment Co. , Limited

Verified Supplier
7 Years
guangdong, guangzhou
Business Type :
Manufacturer
Total Annual :
800000-1500000
Employee Number :
30~50
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement