MachineU > China Products > Electrical Equipment & Supplies > Electrical Instruments > Power Measuring Instrument
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
Specifications
Brand Name :
Sinuo
Model Number :
SN2104
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Payment Terms :
L/C, T/T, Western Union, MoneyGram
Supply Ability :
20 Sets Per Month
Delivery Time :
20 days
Packaging Details :
Carton Box
Applied Standard :
IEC60320-1
Applied Clause :
Clause 23.3
Humidity :
30%-90%
Force Range :
0-100N
Cable Bending Height :
40±2 mm
Pulling Method :
Manual operation
Test Station :
Single
Working temp. :
5-35℃
Description

IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A

Equipment overview:

Th coupler lateral pulling test apparatus is manfactured according to the IEC60320-1 clause 23.3 and figure 19.

It is used to test the connector being pulled out of the appliance socket under lateral stress, so as to assess the mechanical strength of the coupler.

Test principle:

Plug a connector rated over 0.2 A into an appliance inlet that corresponds to the type of connector to be tested and complies with the relevant standard table. Appliance input sockets are installed in suitable test equipment, an example is shown in IEC 60320-1 Figure 19 with pins facing up. Should conform to the dimensions of 40 mm ± 2 mm. The lateral pull as specified in IEC 60320-1 Table 7 is first applied to the cord in a direction perpendicular to the plane containing the current-carrying pin axis and then released immediately. This sequence of operations is performed 50 times in one direction, then 50 times in the opposite direction.

Structure:

The connector test should be equipped with an appliance inlet of a type corresponding with the connector to be tested and complying with the relevant standard sheet.

Technical parameters:

Test station Single station
Flexible cable bending height 40±2 mm,adjustable
Working temperature 5-35℃
Humidity 30%-90%
Pull force range 0-100N
Pulling method 50 times in one direction and then 50 times in the opposite direction
Cable selection and corresponding pull value table
Appliance input socket Optional gauge according to requirements
Product tags

mrc tension meter

,

distributor tension meter

,

tester 266 clamp meter
Send your message to this supplier
Send Now

IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A

Ask Latest Price
Product Detail
Brand Name :
Sinuo
Model Number :
SN2104
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Contact Supplier
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A

Sinuo Testing Equipment Co. , Limited

Verified Supplier
6 Years
guangdong, guangzhou
Business Type :
Manufacturer
Main Products :
Electrical Appliance Testing Equipment, Energy Efficiency Lab, Vehicle Testing Equipment
Total Annual :
800000-1500000
Employee Number :
30~50
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Switch Life Tester
MachineU China Products Electrical Equipment & Supplies Electrical Instruments Power Measuring Instrument
Contact Supplier
Submit Requirement