MachineU > China Products > Machinery > Machine Tool Equipment > Bending Machines > Profile Bending Machine
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
Specifications
Brand Name :
Sinuo
Model Number :
SN1112F
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Negotiable
Payment Terms :
T/T
Supply Ability :
20 Sets Per Month
Delivery Time :
30 Days
Packaging Details :
Plywood Case
Applied Standard :
IEC 60598-1
Applied Clause :
Article 4.14.3
Test Station :
Single station
Control Method :
PLC control
Flexing Angle :
0-360°, adjustable
Flexing Speed :
0-60 cycles/min
Test Cycles :
0-999999
Loading Weight :
5N,10N, 20N
Description

IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

Product Information:

Standard: Clause 25.14 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements, IEC 60598-1 Article 4.14.3.

Application: It is used to test the bending resistance of the power cord of household appliances when it enters the appliance, and to verify its reliability. The purpose of verifying that the luminaire regulating device does not stress, pinch, damage or twist the cord or cable more than 360° along the longitudinal axis during normal operation is to verify its interference with the cord or cable.

Test sample: Household appliances with power supply cords (such as electric irons) or household appliances with relative motion that need to be moved during work; hand-held electric tools; bracket or extension tube

Technical Parameters:

Input Power Single phase AC220V, 60Hz
Control Method PLC control, touch screen operation
Station One
Drive Mode Servo motor drive
Sample clamping method

Mechanical clamping, adjustable clamping point position, two clamping methods

Method 1 (IEC60335-1 Section 25.14):

IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

Method 2 (IEC60335-1 Article 23.3 and IEC60598-1 Article 4.14.3):

IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
Flexing Angle 0-360°, preset on the touch screen
Choice of bending direction IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
Flexing Speed 0-60 cycles/min, can be preset
Test Cycles 0-999999, can be preset
Loading Weight 5N,10N,20N
Loading Voltage 0-250V, can be adjusted
Sample judgment Judge the conduction by current

Common Faults and Treatments:

No. Fault Reason Treatment

1

 Turn on the “Power” switch, but the indicator light not turn on The external power supply is not connected Please connect to the external power supply
The fuse is broken Find out the reason and change the fuse.
The indicator light damaged Replace the light

2

 Turn on the “Power” switch, Touchscreen not work The internal DC24V power supply is in problem Replace the DC24V power supply
Touchscreen damaged Replace the touchscreen
3 Touchscreen no response Connection to PLC loose Reconnect
Touchscreen damaged Replace the touchscreen
4 Load power no power supply Load socket damaged Replace the socket
The fuse is broken Change the fuse

5

Press down “Start” button, but the manipulators do not work.

 The display value and preset value of test times are the same Press “Count Cleared” button
The E-STOP button is not reset Release E-STOP button
There is foreign object in the machine, the machinery is stuck Remove the foreign object
It is not under auto test mode Press “Start” button
Connection to motor loosen Reconnect
Not in starting position Homing
6 Noise Swivel speed low or too high Reset the speed
Connection to motor loosen Reconnect

IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

Send your message to this supplier
Send Now

IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

Ask Latest Price
Watch Video
Product Detail
Brand Name :
Sinuo
Model Number :
SN1112F
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Negotiable
Contact Supplier
video
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test
IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

Sinuo Testing Equipment Co. , Limited

Verified Supplier
7 Years
guangdong, guangzhou
Business Type :
Manufacturer
Main Products :
Electrical Appliance Testing Equipment, Energy Efficiency Lab, Vehicle Testing Equipment
Total Annual :
800000-1500000
Employee Number :
30~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Led Testing Equipment
MachineU China Products Machinery Machine Tool Equipment Bending Machines Profile Bending Machine
Contact Supplier
Submit Requirement