Specifications
Brand Name :
R
Model Number :
G08
Place of Origin :
China
Payment Terms :
T/T
name :
Medical equipment test tool-- G08, general-purpose gas Flow Analyzer
keyword :
siriusmed ventilator
Warranty: :
1 Year
Instrument classification :
Class I
Widely usage range :
Suitable for anesthesia machine and ventilator
Accuracy :
3% of reading or 0.5 cmH2O
Description

Introduction
The Flow Analyzer Go8, referred to hereafter as the Analyzer, is a general-purpose gas flow analyzer. The Analyzer measures
unidirectional gas flow, airway pressure and high pressure. The Analyzer can also measure tidal volume, inspiratory peak pressure, positive
end-expiratory pressure, etc.
This manual provides a description of the Analyzer and its applications. lt should be used as a guide when using the instrument to analyze ventilators and test lungs.
Key Features
Unidirectional flow rate, airway pressure, low pressure, high pressure and oxygen concentration measurement
Flow, pressure real-time waveform display
Touch buttons control
RS232 serial port and can be used for flow calibration

Intuitive interface, easy to operate
Easy to carry

Unpacking and inspection
Use the following checklist when unpacking the Analyzer. There are no special unpacking instructions, but be careful not to damage the instrument when unpacking it.
Check the shipping carton is in good condition. lf the shipping carton is damaged, carefully continue unpacking the instrument and note any dents and scratches on the Analyzer. Save the damaged shipping carton and packing material for the carrier inspection.
lf there is no shipping damage, continue removing the Analyzer from the shipping case. Save the box and packing materials.
Perform a visual inspection to ensure that the Analyzer is intact and if there is any physical damage, such as bent or broken parts, dents, or scratches. If the Analyzer has been damaged, call the theSiriusmed Service Center immediately.
After unpacking the Analyzer, check to see if all of the standard accessories listed under the packing list have been included with the analyzer. if anything is missing, contact the Siriusmed ServiceCenter.

Operating Environmental Conditions
Temperature Range 10 - 40 °c
Ambient Humidity 0- 80 %non-condensing
Barometric Pressure 520-800 mmHg
Storage Environmental Conditions
Temperature Range -25 to 50°℃
Humidity 0 -95 % non-condensing
Power Requirements
lnput Voltage Range 12V DC
Power Consumption 36 VA
Flow Port
Flow Range 0 -200 LPM
Accuracy 3% of reading or 0.1 LPM
Resolution 0.01 LPM flow <5 LPM;0.1 LPM flow >5 LPM

Notes

Flow accuracy is specified for dry air or oxygen.

Do not use with humidified gases.

Flow accuracy is obtained by allowing the Analyzer to fully warm up.

Airway Pressure
Pressure Range 0 - 100 cmH2O
Accuracy 3 % of reading or 0.5 cmH2O
Resolution 0.1 cmH2O
High Pressure
Operating Pressure Range 0 - 690 kPa
Accuracy 2 % of reading or 5 kPa
Resolution 0.1 kPa
Barometric Pressure
Operating Pressure Range 120 - 860 mmHg
Accuracy 2 % of reading or 5 mmHg
Resolution 1 mmHg
Gas Temperature
Temperature Range 0 - 70 °C
Accuracy 2 %FS
Resolution 0.1 °C
Oxygen Concentration(Optional)
Range 0 - 100 %
Accuracy 2 %FS
Resolution 0.1 °C

Send your message to this supplier
Send Now

G08 General Purpose Gas Flow Analyzer Medical Equipment Test Tool

Ask Latest Price
Brand Name :
R
Model Number :
G08
Place of Origin :
China
Payment Terms :
T/T
name :
Medical equipment test tool-- G08, general-purpose gas Flow Analyzer
keyword :
siriusmed ventilator
Contact Supplier
G08 General Purpose Gas Flow Analyzer Medical Equipment Test Tool

Beijing Siriusmed Medical Device Co., Ltd.

Verified Supplier
4 Years
beijing, beijing
Since 2013
Business Type :
Manufacturer, Distributor/Wholesaler, Importer, Exporter, Trading Company, Seller, Other
Total Annual :
20000000.00-80000000.00
Employee Number :
140~200
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement