Ultrasonic Cleaning Machine for Electroplate Industry 38~960 Liters with Heating Function​

Application of Ultrasonic in Electroplate Industry

At present, the electroplating industry is not very familiar with the practical application of ultrasonic cleaners. The application of ultrasonic cleaners in the electroplating industry is introduced.
The purpose of electroplating and pretreatment is to remove the dirt and impurities on the surface of the workpiece, making it a suitable appearance for electroplating. There are many reasons for poor quality before electroplating. And the pretreatment is poor, and most of them do not use ultrasonic cleaning equipment.
Pre-plating treatment must be performed according to the actual situation of the workpiece, using appropriate methods for effective cleaning. Metal-based materials are generally divided into stamping parts and die-casting parts. Stamping oil is generally used for stamping oil, because of its high density ratio, it is easy to clean. Generally available for pickling and electrolysis
For example, zinc, aluminum, copper, and other difficult-to-clean castings are because various elements are added to die-casting and molding, and pulled up. In the rolling process, cutting and polishing must also use various petroleum products, such as oil, polishing oil, Ultrasonic cleaner, etc., oil can be easily
In addition, the polishing oil can be divided into butter, white oil, green oil, etc., which is difficult to remove. Therefore, you must choose a suitable ultrasonic cleaning equipment and cleaning liquid.
The frequency of the ultrasonic frequency is generally 20-100KHZ. The low-frequency and intermediate-frequency power of the ultrasonic cleaning equipment is usually used for the pretreatment of ordinary workpieces, such as the frequency of 25-28khz and the power of 1W / cm.
Because low-frequency cavitation is more likely to occur in the medium than high-frequency cavitation, this type of cleaning machine can meet the requirements for simple and inaccurate workpieces. The noise is large and the price is cheap. For some cultural relics, the accuracy is higher, and it is generally used for high-frequency -68 kHz high-power ultrasonic cleaning machine. Therefore, the cleaning machine has a good cleaning effect on workpieces with complex appearance shapes such as gaps, gaps, deep holes, blind holes, etc. However, the effect of ultrasonic cleaning is only to reach the capacity of the cleaning liquid. Avoid deep holes and blind holes in the air, and pay attention to the dropping and floating of impurities, and the oil pollution treatment and cleaning are not in place.
The electroplated workpiece is bleached, but some more complex workpieces, especially cracks, deep holes, and blind holes (such as spectacle spring legs) cannot achieve the desired effect. Only ultrasonic waves are used, except for cracks and deep holes. Residual plating solution. Generally can be in this regard
Choose an ultrasonic cleaner with a slightly higher frequency and general power density.

Specification:

Other model choice:

Additional functions can be added, such as Filter, Lift, DI water etc.


Cleaning effect:

Our service:

Pre-sale Service
1. Reply your messages or emails within 12 hours.
2. OEM&ODM acceptable(Custom- made logo or package).
3. Professional solutions are provided.
4. New product recommendation.
5. Drop- shipping available

After- sales Service
Within 12 months, if there will be any problem with the machine, we will allow the professional person to handle it for you or to the site.