4.2g/cm3 density of the zircon nozzle as flow control refractory in the ladle and tundish

Products Features:

Comparing the Al2O3-C, Al2O3-MgO-C,MgO-C, MgO-Spinel etc. materials nozzles, our embedded 4.2g/cm3 density of the zircon quality nozzle as flow controlling refractory in the ladle and tundish widely used in the small and medium types of steel plant. It has the better quality quality, and longer working life than the one of the 75% Zircon nozzle. , comparing to the Al2O3-C material nozzle, it has the lower purchased cost, and comparingly the better quality of the 75% zircon nozzle insert.

Production Process

Our 4.2g/cm3 density of the zircon nozzle as flow control refractory is made of the high quality of e-fuzed magnesia and zirconia grain and sand, bonding agent, through the the automatic system mixing, drying, pressing, inspecting, sintering, etc. series system process, then pack into the carton, and wooden box with the desired shipping mark sticked, then deliver to the china mainland and oversea from our factory.

Inspection times in production process

1.After Mixing, inspect the water content of material,

2.After pressing, inspect the size,missing angle, etc. of semi-finished products

3.After sintering, inspect the size, missing angle, cave, etc. of finished products

4.Before packing, inspect the size, missing angle, cave,of the finished prodcuts again.

Size of one body of 4.2g/cm3 density of the zircon nozzle

Sample for 80*40*46*20.5mm, or according to the clients' demand.

Chemical Composition and Physical Propeties

Size Tolerance:

Middle Hole Diamter:+-0.5mm, other sizes: +-1mm.

Exported Countries

India, Pakistan, Iran, Thailand, Turkey, Peru, USA, etc.

Fangming NewM's Goal

Large size, super special shaped super high temp. zirconia ceramics, we will offer the comprehensive and integrated super high temperature, strong crushing resistance, strong erosion resistance application condition solutions.

Fangming NewM Introduction

Fangming NewM is setup in Sep.,2015. We are one high-new technology enterprise of producing the high purity and ultra-high temperature new type of the composite nano-ceramic materials and products based on the zirconia (Zirconia Slide Gate Plate ), and urgently much needed to breakthrough key technologies in the new materials category advocated and developed by the state in the 2025 planning catalogue, the High-New Technology manufacturer of the rare composite new materials of the super high temperature structural ceramics, which are applied in the extreme environments.

Now we have gained the ISO9001:2015 Quality Management System Certificate, ISO14001:2015 Environment Management System Certificate, OHSAS18001:2007 occupational Health&Safety Management System ,ISO50001:2011 Energy Management System Certificate, etc. Certificates.We have owned the 8 related invention patents and utility model patents.