Photovoltaic Rolling Glass Industry-HP ZrO2 Composite Ceramic Lip Brick

Key Point of Lipbrick:

Lip brick is one of the key equipments in the production process of photovoltaic rolling glass. It is used in the front zone of shaping rolls of the glass production line, directly contacts with the glass liquid, and has the direct impact on the yield rate of glass products.The lip brick is desired to have the good thermal shock stability and good alkaline resistance, also the lip brick itself has the short time of bubble-removing, long serving life, high yield rate of glass products etc. performance advantages.

Product Features: ZrO2 Lip Brick

The high-purity and high-performance nano-zirconia composite ceramic lip bricks, which is produced by Fangming NewM, It is used in the front zone of shaping rolls of the glass production line. The size of this product we are supplying can be customized according to customer's required size. It is composed by the several pieces with the seamless joints and the smoothness of the surface is controlled below 0.003 mm. It has the excellent thermal shock stability, the strong erosion of alkaline resistance, long serving life and high yield rate of glass products etc.advantages. We can provide the super-high-temp. ZrO2 nano-ceramic products with the large size and complex shapes, the supplied size ranges: Length of 200-1200MM, width of 200-1000MM, and Height of 15-50MM.

Chemical Composition and Physical Propeties

Size Tolerance:

All size of the ZrO2 Lipbrick is +-2mm.

Company Profile:

Zhengzhou Fangming High Temperature Ceramic New Material Co., Ltd. ( hereinafter referred to as Fangming NewM) setup in Sep., 2015. We are one high-new technology enterprise of producing the high purity and ultra-high temperature new type of the composite nano-ceramic materials and products based on the zirconia material, and urgently much needed to breakthrough key technologies in the new materials category advocated and developed by the state in the 2025 planning catalogue, the High-New Technology manufacturer of the rare composite new materials of the super high temperature structure ceramics, which are applied in the extreme environments.

Main Products:

Fangming NewM have itself R&D, mass produced the super-large-scale and complex shapes, ultra-high-temp. rare-earth oxide composite nano-ceramic products with exacting process requirements. The bulk density can reach 5.5cm/3 and the apparent porosity can be controlled within 1%, and they have the excellent features of thermal shock stability, erosion of the alkaline resistance, crushing resistance at high temperature state,etc.,the physical index is almost the same with the E-fuzed high ZrO2 material, and better quality than other E-Fuzed materials .They are widely used in the metallurgy, casting, glass,artificial crystals, etc. industries, such as the large size and high performance ZrO2 ceramic slide plates used in the large capacity of EAF tap hole industry, and the HP(high performance) ZrO2 composite ceramic lip brick and the special-shaped parts used in the key zones of the ultra-thin Electronic glass industry.

Company Goal:

Ultra-high-temp rare earth oxide composite ceramics products, we will provide the all-round integrated solutions for ultra-high-temp.temperature, high erosion resistance and high erosion application conditions.