95% Monoclinic Zirconia Granulated Powder and grain to produce the flow control refractory

Products Features:

Our 95% Monoclinic Zirconia Granulated Powder and grain to produce the flow control refractory , has the higher purity features, strong chemical stability and physical mechenism properties at the high temperature working conditions, strong corosion and crushing resistance to the metal liquid and slag, and excellent thermal shock stability, and so on. As flow controlling Refractory, it is mainly produced the zirconia nozzle insert, and ladle and converter taphole slag-stopping system, slide gate plate and matched ring.The finished products are embedded in the alumina or corundum quality body, the composite tundish nozzle can be used in the sliding system of ladle and tundish directly, do not desired to heat before using. Especially used for smelting the special high grade steel types, such as low carton steel, alloy steel etc.

Chemical Composition and Physical Propeties

Size we are usually supplying:

0-1mm, 1-3mm, 0-500mesh etc.

Exported Countries

India, Pakistan, Iran, Thailand, Turkey, Peru, USA, etc.

Fangming NewM's Company Profile

Setup in Sep. 2015, Fangming NewM is one High-New Technology Enterprise, manufacturing the high-purity and ultra-high-temp. new type of composite nano-ceramic materials and products as the zirconia basic material, and the one of the urgently to be solved and breakthrough key technologies in the new materials category advocated and developed by the state in the 2025 planning catalogue, the one of the rare composite new materials of the super high-temp. structural ceramics, applied in the extreme environments. We has obtained the ISO 9001:2015 quality management, ISO 14001:2015 environmental management and OHSAS 18001:2007 occupational health and safety management system, the energy efficiency management system, etc. series qualifications, and has owned eight patents.

Since setup, our company is devoted to the R&D, creation of the new type of composite nano-ceramic materials and products. Fangming NewM mainly produce: 1). ZrO2 Nozzle, slide plate, ZrO2 Ring, Insert, applied as flow control function in metallurgy at high-temp. State, 2). ZrO2 atomizing nozzle in the amorphous alloy powders, 3).Rare-Earth Oxide Composite SS ceramic thermal field in artificial crystal (Sapphire, laser gem, etc.) grower, 4).Pre-sintered ZrO2 parison, base plate for metal sputtering target, 5). High density ZrO2 ceramic lip brick in ultra thin electronic glass , sintering gasket in electronic device. 6). Device in hot compression equipment of 3D glass, etc. The quality of products we are producing is the same, even better than the one produced by the other producers in the same industry from USA, European countries.