Airtight, TPU Zipper, PVC Zipper, EVA Zipper, Gastight, Multi-Use, 3# 5# 7#, Invisible Nylon,
Drysuit Airtight, TPU PVC EVA Zipper, Gastight Diving Suits, Multi-Use, 3# 5# 7#, Invisible Nylon
PRODUCT NAME | TPU Airtight & Waterproof Zipper |
MODEL | 8AM |
Size | 8# (or Customize) |
MATERIAL Please inquiry us Bagplastics@vip.163.com | Surface treatment: TPU coated on front side & TPU film pasted on back side |
Tape: Polyester |
Teeth: Nylon |
AIRTIGHTNESS | ≥30 Kpa (0.3Bar) |
ZIPPER TOTAL LENGTH | 20cm~100cm (or Customize) |
ZIPPER INTERIOR LENGTH (EFFECTIVE LENGTH) | |
GROSS WEIGHT | Approx 58g/m in roll |
ZIPPER WIDTH | 40 mm |
ZIPPER TAPE THICKNESS | 0.8 mm |
COLOR | Black (or Customize) |
TECHNICAL SPECIFICATIONS (ENTERPRISE STANDRED)-8AM Please inquiry us Bagplastics@vip.163.com |
Test of airtightness | Min:30 Kpa |
Breaking strength crosswise of chain | Min:800 N |
Holding strength of top stop | Min:175 N |
Tab pull-off strength | Max:75 N |
Sliding force along chain | Max:35 N |
Cycles test* | Min:700 Cycles |
*Cycle Test for Zipper Pull at 10-15m/minute: 700 Cycles Min.
1. Miltary
Aviation engines, launch devices, weapons and ammunitions, explosives and the rockets, aircrafts, missiles, an important tool of weapons and equipments seal flexible packaging.
Please inquiry us
Bagplastics@vip.163.com
2. Protective clothing Diving suits, medical protective suit, heat preservation suits, submarine escape suits, reduced pressure suits, dangerous prevent suits, prevent pollution radiation protection suit, to protect you from virus, dust, liquid, gas or other harmful substances.
3. The sports leisure class Gas chamber, water walk ball, inflatable castle, inflatable tents, hovercraft, hot air balloon, eaves sails, etc., the characteristic of the waterproof and airtight zipper decideds it is extraordinary, extensive and important applications.
This Zipper keeps you dry even under water.
This airtight and watertight zipper can be used for diving suits, immersion suits, chemical suits, and emergency suits to protect workers from hazardous materials. Smart use of zippers :
Close the zipper till the slider completely touches the stop to ensure tightness.
When opening or closing, always ensure that the direction of the pull is along the line of the metal teeth. When closing, ensure that both sides of the open zippers are parallel. It is very important to avoid catching undergarments in the teeth. If the slider should jam during closure, DO NOT FORCE IT. Pull back the slider, remove the obstruction and slowly attempt to close it again.
Excessive force will break the metal chain and destroy the fastener. Also avoid bending the zipper excessively as this will eventually cause the metal chain running inside of the fastener to break.
Please inquiry us
Bagplastics@vip.163.com
Please check the overall length (OL) and effective length (EL) before ordering.
|
Product Name | CR Airtight & Waterproof Zipper |
Size | #8 |
Total Width | 70mm |
Tape Coating | Neoprene (CR) |
Teeth Material | Bronze |
Sealing Strength | Min: 100 Kpa (1 Bar) |
Breaking strength crosswise of chain | Min: 350 N/In |
Holding strength of top stop | Min: 175 N |
Tab pull-off strength | Max: 75 N |
Sliding force along chain | Max: 55 N |
Cycles test* | Min: 300 cycles |
PU (thermoplastic polyurethane) coated airtight and waterproof zipper.
Please inquiry us
Bagplastics@vip.163.com
Offers liquid and air resistance for the purpose of comfort, safety or other special aims.
The zipper provides sealing strength over 30 Kpa, this is achieved by wrapping the teeth and tape of the zipper under TPU layer,
which is coated on the teeth and tape. When the zipper teeth are closed, the peripheral TPU of the zipper teeth is tightly
combined together, the gap of the zipper can be well sealed with both sides TPU layer.
Please inquiry us
Bagplastics@vip.163.com
ECO friendly.
Smooth surface.
Has good weldability (high-frequency welding) with TPU, PVC and other thermoplastic material.
Has good flexibility and resistance to high and low temperatures.
Please inquiry us
Bagplastics@vip.163.com