304 stainless steel sliding door roller of shower room

Product description

* stainless steel make the roller less noise ,anti-rust,long-life.

* special pvc let the roller running smoothly and long-life.

3) To remove the rollers from most sliding unit's you need to remove the bottom of the sliding unit's frame.

Patio door single rollersMost likely the screw that holds the roller in place is the same screw that holds the frame together. Remove the screw from both sides of the unit. Then try to remove the bottom piece of the frame off of the sliding unit; you may need to use a rubber mallet or a piece of wood and tap on the bottom of the frame until it comes off of the sliding unit.

Now that you have removed the bottom of the frame you can take a close look at your patio glass door rollers. Remove one of the rollers and match it up with one of the rollers on this page:

Step 1: Clean the Sliding Glass Door Track

Standard sliding glass doors all have tracks. The track acts as a guide for the door and also allows roller wheels to help the door run smoothly.

Standard sliding glass doors have tracks

Over time the sliding glass door track accumulates dirt and grime. This slows down your door considerably.

Use a toothbrush or wire brush to clean the inside of the sliding glass door track. I tried using a toothbrush at first but then switched over to the wire brush I use for cleaning my golf clubs. If you know someone who golfs you could borrow this kind of wire brush from them.

Use a toothbrush or wire brush to clean the sliding glass door track

Once all the dirt is cleared from the track use a vacuum to suck it up.

Vacuum all the dirt and grime removed from the sliding glass door track.

FAQ

Q:Are you trading company or manufacturer?

A:We are manufacturer.

Q:How long your delivery time?

A:General is 15-20 days.and we can negotiation it.

Q:Do you provide samples?is it free or extra?

A:We can provide sample if first time cooperate,you need pay the sample and cost of shipping.

Q:What is you payment term?

A:Payment less 1000 USD,pay 100% in advance,payment over 1000 USD.,first pay 30%,settle the payment before delivery.

Q:What about your quality?

A:Usually we will confirm the sample by both,and our QC will strictly to check every step,and make sure every piece must be inspection before delivery.we accept change if there are seriously quality problem that affect your client use it.