304 stainless steel sliding door roller of shower room pulley

Product description

* stainless steel make the roller less noise ,anti-rust,long-life.

* special pvc let the roller running smoothly and long-life.

Step 2: Lubricate the Sliding Glass Door Track

Use WD-40 or a silicone based lubricant and spray the entire track.

Lubricate the entire sliding glass door track

As some fans of Home Repair Tutor know, I love using Blaster’s Garage Door spray lubricant because it’s silicone based and doesn’t attract dirt buildup. It costs about $5 and can be found at any Home Depot or Lowes here in the states.

Make sure to wipe up any overspray that lands on the floor. It will create quite a slippery surface.

Step 3: How to Adjust Sliding Glass Door Rollers for a Smoother Ride

Inside a standard sliding glass door there are adjustable rollers that help it slide back and forth on the track. There are holes on your sliding glass door that conceal the adjusting screws to these rollers.

On my door the holes had plastic plugs in them. I used a steak knife to pry the plugs loose. There are two sets of rollers on each side of the sliding glass door.

Remove the plugs that cover up the sliding glass door roller adjusting screws

I used a phillips head screwdriver to turn the roller adjusting screw. This adjustment screw will move the roller height up or down and thus, your sliding glass door height will go up or down by as much as 1/4 inch or 1/2 cm. Tinker around with the roller screws to see if the door glides better when it’s at a lower or higher height.

Turn the sliding glass door roller adjusting screws to make the door higher or lower

At this point it may not be a bad idea to spray some lubricant into the adjustment screw opening. This will help the sliding glass door rollers operate a bit better.

FAQ

Q:Are you trading company or manufacturer?

A:We are manufacturer.

Q:How long your delivery time?

A:General is 15-20 days.and we can negotiation it.

Q:Do you provide samples?is it free or extra?

A:We can provide sample if first time cooperate,you need pay the sample and cost of shipping.

Q:What is you payment term?

A:Payment less 1000 USD,pay 100% in advance,payment over 1000 USD.,first pay 30%,settle the payment before delivery.

Q:What about your quality?

A:Usually we will confirm the sample by both,and our QC will strictly to check every step,and make sure every piece must be inspection before delivery.we accept change if there are seriously quality problem that affect your client use it.