15m3/H spiral sludge dewatering machine food factory sludge dewatering equipment
Pumps and dewatering equipment are used to remove water from a volume of liquid, solid material or soil. Pumps simply remove liquid from a volume of liquid, whereas dewatering equipment separates water from another material such as soil or sludge.
The difference between belt type sludge dewatering machine and stacked screw type sludge dewatering machine.
1. The operating cost of belt sludge dehydrator is too high. Perhaps those who are really active in the front line of the sewage treatment plant know that it is not too difficult to build the sewage treatment plant, but it is not easy to ensure the normal operation every day, because the operation cost of the traditional sludge dewatering machine is too high.
In addition to huge water and electricity costs, there are also labor management and maintenance costs. The operation speed of the stacked screw sludge dewatering machine is slow and the power consumption is not more than 2 kwh even when the model is running. It realizes continuous unmanned operation and saves a lot of labor costs.
2. The belt type sludge dehydrator is easily blocked. In the process of solid-liquid separation, whether it is belt type, centrifugal type or plate frame type, it is easy to block. For many years, it seems impossible for this industry to solve problems without fundamental innovation.
In order to prevent clogging, the above machine can only be washed with a large amount of water, which not only wastes water, but also increases the burden of internal circulation of sewage treatment. Once blocked, it must be shut down for maintenance, which will cause the dehydrator unable to continue to operate and affect the normal production and operation of the enterprise or society.
The filter device of the stacked screw sludge dehydrator is composed of a fixed ring and a movable ring. The rotation of the screw shaft promotes the rotation of the traveling ring, so as to continuously remove the dirt in the clearance and completely prevent clogging.
Specification///model | DL-101 | DL-102 | DL-201 | DL-202 | DL-301 | DL-302 | DL-303 | ||
Processing capacity(m³/h) | Mud concentration(S.S.0.2-0.5%) | 0.6-1.5 | 1.2-3.0 | 1.8-4.5 | 3.6-9.0 | 6.0-15 | 12-30 | 18-45 | |
Mud concentration(S.S.0.5-2.0%) | 0.25-0.6 | 0.5-1.2 | 0.75-1.8 | 1.5-3.6 | 2.5-6.0 | 5.0-12 | 7.5-18 | ||
Mud concentration(S.S.2.0-5.0%) | 0.1-0.25 | 0.2-0.5 | 0.3-0.75 | 0.6-1.5 | 1.0-2.5 | 2.0-5.0 | 3.0-7.5 | ||
Absolute dry quantity(kg/h) | Mud concentration(S.S.0.2-0.5%) | 0-3.0 | 2.4-6.0 | 3.6-9.0 | 7.2-18 | 12-30 | 24-60 | 36-90 | |
Mud concentration(S.S.0.5-2.0%) | 0-5.0 | 5.0-10 | 9.0-15 | 18-30 | 30-50 | 50-100 | 90-150 | ||
Mud concentration(S.S.2.0-5.0%) | 0-5.0 | 5.0-10 | 9.0-15 | 18-30 | 30-50 | 50-100 | 90-150 | ||
Mud cake moisture content(%) | 75-85 | 75-85 | 75-85 | 75-85 | 75-85 | 75-85 | 75-85 | ||
Spiral diameter (mm) * quantity (pieces) | 100*1 | 100*2 | 200*1 | 200*2 | 300*1 | 300*2 | 300*3 | ||
Use power (KW) | 0.2 | 0.3 | 0.6 | 0.8 | 0.8 | 1.2 | 1.95 | ||
Equipment dimensions (mm) | L | 1816 | 1816 | 2500 | 2500 | 3255 | 3455 | 3605 | |
W | 756 | 910 | 850 | 935 | 985 | 1295 | 1690 | ||
H | 1040 | 1040 | 1270 | 1270 | 1600 | 1600 | 1600 | ||
Reference weight (kg) | 190 | 275 | 360 | 470 | 820 | 1350 | 1820 |