High Efficiency Water Purifier Equipment For Sewage Treatment

■ Introduction

Stripping technology has the characteristics of mature and high-efficiency, and the key points for the stripping control of ammonia nitrogen wastewater. According to the water quality pH data, it is usually adjusted by frequency conversion to make the wastewater pH 115 before entering the tower, and the blowing and dewatering temperature is usually controlled above 50°C. The pH adjustment tank is blown off by the first-stage blow-off tower by the lift pump, and the first-stage blow-off tower is blown off. The pH will drop after removal, so liquid caustic soda is added to further adjust the pH value. The wastewater pHNl15 of the secondary blow off. The ammonia nitrogen stripping tower adopts a two-stage countercurrent method. The ammonia nitrogen wastewater treatment process shows that under alkaline conditions T (pH=115), the ammonia nitrogen in the wastewater mainly exists in the form of NH3.

■ Working Principal

The purification process of the integrated water purification device is the same as that of the urban water supply plant. It has coagulation tank, sedimentation tank, filter tank, water quality stabilizing device, backwashing device, water pump and electrical control cabinet. Now they are introduced as follows

1. The raw water into which the coagulant is added to the coagulation tank is stirred by a mixer in the water inlet coagulation tank, so that the suspended solids in the water and the coagulant fully react to form rock flowers. A general water purification device uses a vortex reaction to mix the water and the coagulant, but the effect is unstable due to changes in the amount of water. The water purification device is mixed with a mixer, and the effect is not affected by changes in water volume.

2. The water in the sedimentation chamber is coagulated by adding coagulant to form rock flowers and flows into the sedimentation tank of the equipment for precipitation. The sedimentation tank adopts the inclined tube sedimentation method, and the solid-liquid separation is completed through the trapezoidal inclined plate sedimentation chamber. Mud bucket.

Parameters

Why Choose Us?

1. Longdai has more than 10 years of experience in wastewater and sludge treatment.

2. We introduce German technology, thus our product is much better than other Chinese manufacturers.

3. We only use the best parts from best supplier.

4. We have our own R&D center and complete manufacture system.

FAQ:
Q: Are You Trading Company Or Manufacture?
A: We Are Both Manufacture And Trading Company. We Have Over 30 Years' Professional Experience As a Waste Water Treatment Equipment Manufacturer And Engineering Service Enterprise.

Q : What Are Your Main Products?
A:Keywords :Sludge Dewatering Machine Equipment, Screw Type Sludge Dewatering Press Sludge Screw Press, Dewatering Sludge Machine Screw Press ,Sewage Treatment Equipment ,Sludge Treatment Plant,Screw Press Sludge Dewatering ,Dewatering Sludge,Dewatering Machine For Sludge, Dewatering Sludge Machine Screw Press, Rotary Drum Bar Screens, Equipment DAF, DAF Price ,Dissolved Air Flotation System Price, Sludge Shaftless Screw Conveyor,Chemical Dosing Device ,MBBR Price,MBBR Media,Disc Diffuser, Polymer Preparation Chemical Dosing System, and other customized machines.

Q: How Can I Find The Suitable Model?
A: Please Provide Flow Rate, Solids Content And Sludge Type, or directly contact us by the clicking the “contact” icon. We Can Assist You In Model Selection.

Q: Where Is Your Factory Located?
A: Yixing City, We are in the famous city of environmental protection equipment ,professional for Sludge screw press dewatering Machine ,Which Is Very Close To Shanghai With Only Less Than 3 Hours' Driving. Welcome for your visiting.

Q: Do You Provide OEM Service?
A: Yes. We Can Do The Customized Design According To Your Different Request for sludge Dewatering.

Q: How About The Production Capacity Of Your Company?
A: Our Factory Covers Area Over 15,000m² And Produces Machines 2000 Sets Per Year.

Q: How Could We Trust You And Your Company? Is This Your First Time Transaction?
A: A: Our Company Has More Than 20 Years Professional Experience. We Cooperate Over 800 Customers in China And Overseas. We Export Nearly 60 Countries All Over The World. And We Have More Than 60+Patents, CE,ISO 9001,SGS Certificates.

Q: Do You Offer After-Sales Service?
A: Video Technical Support, Online Support,Spare Parts, Field Maintenance Repair Service

Q: How Long is Your Warranty?
A: 2 Years After The Arrival Of The Goods. During This Period, As Long As It Is Not a Man-Made Damage, We Send The Damaged Parts Free Of Charge.