40m New Design Digital Laser Measure Distance Meter For Instrument Measuring
Introduction
Firstly thank you for your choice on our handheld laser distance meter.
Please carefully read the safety instructions and the user manual before using this product, otherwise it may result in hazardous laser radiation and electric shock. The person responsible for the equipment must ensure that all users understand these directions and adhere to them.
Forbidden
1. Opening the equipment by using tools (screwdrivers,etc.) without allow.
2. Measuring to sun.
3. Others measuring out of appointed range.
4. Immersing the equipment in water.
5. Cleaning the lens using alcohol or any other organic solvent.
6. Wiping the lens directly with fingers or other rough surfaces.
7. Powering the equipment beyond the rated DC voltage.
Basic Functions
Single Measurement | √ |
Max. / Min. Measurement | √ |
Continuous Measurement | √ |
Area / Volume / Pythagoras | √ |
Plus and Minus | √ |
Meter/Ft/ln Switch | √ |
Measuring Reference | √ |
Buzzer Indicator | √ |
Historical Data Records | 99Groups |
Data Clean up | √ |
Error Message Code | √ |
Battery Indicator | √ |
Digital Level (angle measuring) | √ |
Laser Auto. Switch off | 30s |
Instrument Auto. Switch off | 180s |
Technical Parameters:
Measuring Range | 0.05m~40m 0.05m~60m 0.05m~80m 0.05m~100m 0.05m~120m 0.05m~150m |
Measuring Accuracy | ±1.5mm |
Measuring Unit | m,ft,in |
Laser type | 620~690nm |
Laser Class | Ⅱclass,<1mW |
Single Measurement Time | 0.25s |
Operating Temperature | 0~+40 ℃ |
Storage Temperature | -20~+65℃ |
Batteries | AAA(Alkaline), 2x1.5V |
Measurements Per Battery Set | >8000 |
Weight (Without Batteries) | Approximately 82g |
Dimensions(LxW×H) | 115X50X23mm |
Comment:
*The deviation occurs under unfavorable conditions such as bright sunlight or when measuring too poorly reflecting or very rough surfaces, the environment temperature is too high or too low.
* When measuring distance within 10m, measurement accuracy is±1.5mm; more than 10m, measurement accuracy is calculated as follows:±1.5mm±0.05*(D-10)(D: Measuring Distance, Unit: m)