IButton TM Reader TM01SS 9092L Probe
FEATURES
Solid metal read/write panel-mount probe for the Ddallas iButton family products.
Integrated green LED for user-feedback signaling or no LED model.
Probe guides the entry of the Dallas iButton family products.
Dallas iButton slides over the surface to self-clean contacts.
Accessible shallow probe cavity simplifies removal of debris such as mud.
Probe suited for panels of up to 3mm thickness.
Contacts made from solid 304 stainless steel with blue nylon insulation.
Metric design, pre-wired for easy installation.
TM01SS 9092L with LED probe,panel mount
DESCRIPTION
The TM01SS-9092L Dallas iButton Probe with LED provides the electrical contact necessary for
the transfer of data to and from the Dallas DS19xx family of iButtons. The round probe shape
provides a self-aligning interface that readily matches the circular rim of the Dallas iButton’s
MicroCan package. The solid metal contacts resist wear and are easy to keep clean.
The TM01SS-DS9092L has no moving parts, making it a rugged interface for harsh environments.
The round center contact of the TM01SS-DS9092L houses the LED that is rated for maximum 20
mA DC at 2.7V typically.
The probe comes with a brass M18*1 nut for panel mounting. Since the body of the probe also
forms the ground contact, the panel should be of non-conducting material to avoid ground loops.
The 30-cm cable with connector is provided for easy connection to the system microcontroller.
The mating connector is a Molex Part Number 22-04-1041.


