Single Phase Register Din Rail KWH Meter 20(100)A Large Current High Accuracy
Functions and Features:
* 35mm standard DIN rail installation, complying with standard DIN EN50022; Or front board setting (mounting holes center distance 63mm), users can choose any one by themselves;
* Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993;
* Standard configuration 5+1 digits display (99999.1kWh) by step motor and pulse machinery counter. May select 6+1 digits display;
* Standard configuration one port of pulse output passive (polarity), may select increase a distant port of pulse output passive (no polarity),And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864;
* Bicolor LED instructions power state (green) and signal of power impulse (red);
* Standard configuration don’t detect direction of the trend of load current. May select automatic detecting the direction of the trend of load current and instructions (only red power pulse signal when working, that’s meaning the load current revers. );
* Single direction measure single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.
* Directly connect and use, there are two type you may select: default connection type S, can also select type U as connection.
* Extended terminal cover, in order to protect to use electricity safely, may select short terminals cover.
Technical Parameters:
Model | Accuracy | Rated Voltage (V) | Rated Current (A) | Starting Current (A) | Insulation Performance |
RDK100S | CL 1.0 CL 2.0 | 220V 120V | 2.5(10)A, 3(15)A 5(20)A, 10(30)A 15(90)A, 20(100)A 5(40)A, 5(100)A | 0.04% Ib 0.05% Ib | AC voltage 2kV for 1 minute, impulse voltage 6kV. |
Application:
Model RDK100S single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, using advanced technique of digital and SMT techniques, etc.
It has completely its independent intellectual property rights and minimum size, and also a new single phase two wire active energy meter. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21.
It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step impulse register.
It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, and etc.
Outer nd mount dimension:
Wiring Diagram: