The demand for comfort and versatility for heating, lighting and access control system management in homes and office buildings is growing. In addition, the efficient use of energy is becoming more and more important. People want a comfortable and safe living and working place, which is why an automated system is needed.

However, only through intelligent control and monitoring of all related products can more convenience and safety and lower energy consumption be achieved. This is a real challenge because it means more wiring, from sensors and actuators to control and monitoring centers. For professionals, such a large amount of wiring also means higher design and installation work, increased fire risks and soaring costs. This is the role of KNX!

Each panel provides 6 buttons, large buttons, with backlight/status light, mature structure and stable performance.

It is installed as a system together with other devices on the bus, with simple and intuitive functions. Users can systematically plan and execute these functions according to their needs.

The control panel can be used to control switches, dimming, blinds, etc. Each channel on the panel contains a button and an LED indicator.

Connect the EIB/KNX system through the EIB bus, and use the engineering design tool software ETS software (ETS4 and above) to assign physical addresses and group addresses and set parameters.

The control board is directly connected to the bus through the terminal block and requires 24V DC auxiliary power supply. Each channel of the panel can use the above-mentioned functions and are independent of each other.

Functions

(1) It can be used to switch lighting, curtain opening and closing, projection screen lifting, etc., with long press, short press and reverse functions;

(2) It can control the dimming equipment, with relative dimming and absolute dimming function output;

(3) 8bit scene control can be carried out, and the set scene function can be called;

(4) With LED indication function, a variety of display states can be selected, such as: normally open, normally closed, blinking...

(5) With LED interlocking grouping and LED brightness adjustment functions;

(6) Status and backlight LEDs have the functions of brightness wake-up and delayed extinguishing. The wake-up conditions include key press, touch sensing, object triggering, etc.