1. Product Description
POWERFLOW positioners of 1880 series is meant for use in areas where explosion-proof enclosures are required. It includes the same features as the 1600 series Intelligent Positioners and includes the high accuracy, adaptable additonal software functions, that the POWERFLOW positioner has.
2.Technical Datas
Material | PC,PA6-GF30,SI |
Power supply | 24V DC ±10% |
Set-point signal | 0/4-20mA |
Control medium Dust concentration Particle density Pressure condensation point Oil concentration | Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
Ambient Temperature | 0-70°C |
Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
Electrical Connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) |
Supply Pressure | 3~7 bar, specific values depending on the actuator |
Air Flow Rate | 17 L/min |
Stroke Control Range | Linear 5-30mm |
Installation | As required, Preferably with actuator in upright position, Screw. |
Protection Class | IP66 |
Power Consumption | <5W |
Explosion Proof | Ex nA IIC T4 |
3. Product type selection
4. Features
5. Structure
6. Schematic diagram