1. Product Description
1880 series electro-pneumatic positioner is designed to work with light industrial applications and control valve designs. This positioner is an ideal fit for these markets with its easy self-calibration and auto-tuning function and basic features.
2. Basic advantages
3.Technical Datas
Material | PC,PA6-GF30,SI |
Power supply | 24V DC ±10% |
Set-point signal | 0/4-20mA |
Control medium Dust concentration Particle density Pressure condensation point Oil concentration | Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
Ambient Temperature | 0-70°C |
Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
Electrical Connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) |
Supply Pressure | 3~7 bar, specific values depending on the actuator |
Air Flow Rate | 17 L/min |
Stroke Control Range | Linear 5-30mm |
Installation | As required, Preferably with actuator in upright position, Screw. |
Protection Class | IP66 |
Power Consumption | <5W |
Explosion Proof | Ex nA IIC T4 |
4. Additional software functions
5. Product type selection
Remark:
The product is only used for single-acting line stroke actuator. It is suggested to match the actuator of 40-100 mm internal gas chamber diameter.
6. Schematic diagram