1. Product Description
1880 series intelligent valve positioner is a positioner for integral pneumatic control valves which is the most compact designed positioner in current market. By detecting the position sensor signal, it can adjusts the valve position fast and precisely.
1880 positioner is easy to operate and has rich software functions. It can easily be operated via the OLED display and keypad.
2.Technical Datas
Material | PC,PA6-GF30,SI |
Power supply | 24V DC ±10% |
Set-point signal | 0/4-20mA |
Control medium Dust concentration Particle density Pressure condensation point Oil concentration | Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
Ambient Temperature | 0-70°C |
Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
Electrical Connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) |
Supply Pressure | 3~7 bar, specific values depending on the actuator |
Air Flow Rate | 17 L/min |
Stroke Control Range | Linear 5-30mm |
Installation | As required, Preferably with actuator in upright position, Screw. |
Protection Class | IP66 |
Power Consumption | <5W |
Explosion Proof | Ex nA IIC T4 |
3. Product type selection
Remark:
The product is only used for single-acting line stroke actuator. It is suggested to match the actuator of 40-100 mm internal gas chamber diameter.
4. Dimension
5. Interface angle adjustment
The angle can be adjusted between the positioner and the valve. If need to adjust the interface angle, rotate the main body casing clockwise or counter-clockwise in 180°range.
6. Schematic diagram