Electronic Components Oscillator TCXO 32mhz 32.000mhz Crystal Oscillator
1 , Product description
TCXO is divided into two types, direct compensation and indirect compensation.
2 , Product specification
Item | Test Condition | Specification | |||
1. Rating | |||||
1.1 | Output frequency | Nominal frequency at 25℃ | 32.0000MHz | ||
1.2 | Supply voltage (Vdd) | Supply voltage range. | 1.70~3.50V (Typical 1.8V) | ||
1.3 | Output voltage level(Vp-p) | 0.8 V min. Clipped sine wave | |||
1.4 | Supply current (lop) | Consumption current. | 2.0 mA max. | ||
1.5 | Start up time | 90% Vp-p | 2.0 msec max. | ||
1.5 | Output load | Nominal Load (10kΩ//10pf ±5% | ± 0.1 ppm max. | ||
1.6 | Operating temperature range | -40℃~85℃ | |||
1.7 | Storage temperature range | -40℃~85℃ | |||
2. Electrical characteristics | |||||
2.1 | Frequency Tolerance | Frequency at 25℃ ±2℃, After 2 times reflow | ± 2.0 ppm max. | ||
2.2 | Frequency stability (Based on frequency @ 25 ) | -30℃~+85℃ | ± 0.5 ppm max. | ||
-40℃~-30℃ | ± 2.0 ppm max. | ||||
2.3 | Supply voltage stability | Supply voltage varied ±5% at℃ deg C. | ± 0.1 ppm max. | ||
2.4 | Aging | Frequency drift over 1 year. | ± 1.0 ppm max. | ||
2 years. | ± 1.5 ppm max. | ||||
5 years. | ± 2.5 ppm max. | ||||
10 years. | ± 5.0 ppm max. | ||||
2.5 | Frequency Slope | -30℃~+85℃ | ± 0.1 ppm/℃ max. | ||
-40℃~-30℃ | ± 0.35 ppm/℃ max. | ||||
2.5 | Static temperature hysteresis | Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25 | ± 0.6 ppm max. | ||
2.6 | Harmonics | 2'nd, | -20.0 dBc max. | ||
3'rd | -10.0 dBc max. | ||||
34th, 36th, >69th | -60.0 dBc max. | ||||
2.7 | Phase noise | 1Hz offset | -50dBc/Hz max. | ||
10Hz offset | -80dBc/Hz max. | ||||
100Hz offset | -105dBc/Hz max. | ||||
1KHz offset | -130dBc/Hz max. | ||||
10KHz offset | -145dBc/Hz max. | ||||
100KHz offset | -150dBc/Hz max. |
Output wave form
Measurement circuit
3 , product application
Development of quartz crystal oscillators and their applications in wireless systems.
4 , product features
Industrial grade crystal commonly known as: wide temperature high temperature crystal, crystal and so on, is that in industrial grade crystal, at least the working temperature than the civilian level of -20 - 70 degrees wide, its working temperature is -40 and 85 C, chip cutting type is BT, these two points is very critical.
5 , product advantage
The highest accuracy of TCXO crystal can reach 0.1ppm.
6 , FAQ