MachineU > China Products > Electrical Equipment & Supplies > Industrial Controls > Transformers
SMT CSTCC ZTTC 4.00 Mhz Ceramic Resonator
SMT CSTCC ZTTC 4.00 Mhz Ceramic Resonator
Specifications
Brand Name :
HANSEJOHN
Model Number :
ceramic resonator 4.00Mhz ZTTCP4.00MG/PBRC4.00BR/CSTCC SERIES
Certification :
Rohs，ISO
Place of Origin :
wuxi
MOQ :
10000PCS
Price :
$0.2
Payment Terms :
paypal, Western Union, MoneyGram
Supply Ability :
10000000pcs PER YEAR
Delivery Time :
35 day
Packaging Details :
REEL
Frecuencia :
4.00Mhz
Frequency Accuracy (%) :
±0.5 max
Estilo de terminación :
SMD/SMT
Temperature Coefficient of Oscillation Frequency (%) max. :
±0.3 (Oscillation Frequency drift，-25℃～+85℃)
Oscillation Frequency Aging Rate（10years） (%) max :
±0.2 (From initial value)
Withstanding Voltage (V) :
50 (DC，1min)
Insulation Resistance Ri,（MΩ）min. :
500 （10V，1min）
Temperature Stability （－20℃～ +80℃ ） :
±0.5% max (-25℃ ～ +80℃)
Rating Voltage UR（V） :
15V p-p
Operating Temperature :
-25℃ ～ +85℃
Storage Temperature :
-55℃ ～ +85℃
Insulation Resistance(DC 25V 1 minute) :
100MΩ min
Input/Output Impedance :
330 Ω
Description

1．SCOPE

This specification shall cover the characteristics of the ceramic resonator with the type ZTTCP4.00MG50HC0-R1.

2．PART NO.

PART NUMBER PREVIOUS PART NUMBER
ZTTCP4.00MG50HC0-R1
CUSTOMER PART NO SPECIFICATION NO

3．OUTLINE DIMENSIONS AND MARK

3.1 Appearance: No visible damage and dirt.

3.2 Construction: SMD ceramic packaging.

3.3 The products conform to the RoHS directive and national environment protection law.

3.4 Dimensions and mark

SMT CSTCC ZTTC 4.00 Mhz Ceramic Resonator

4．ELECTRICAL SPECIFICATIONS

4.1 RATING

Items Requirement
Withstanding Voltage (V) 100 (DC,5s max)
Insulation Resistance Ri,(MΩ)min. 500 (10V,1min)
Operating temperature -25℃～＋85℃
Storage temperature -55℃～＋85℃
Rating Voltage UR(V) 6V DC
15V p-p AC

4.2 ELECTRICAL SPECIFICATIONS

Items Requirement
Oscillation Frequency Fosc(MHz) 4.000
Frequency Accuracy (%) ±0.5
Resonant Impedance Ro(Ω)max. 30

Temperature Coefficient of Oscillation

Frequency (%) max.

 ±0.3(Oscillation Frequency drift,-25℃～+85℃)

Oscillation Frequency

Aging Rate (%) max *1

 ±0.1(From initial value)

* Components shall be left in a chamber of +85±2℃ for 1000 hours, then measured after leaving in natural condition for 1 hours.

5．TEST

5.1 Test Conditions

Parts shall be tested under the condition ( Temp.:20±15℃,Humidity :65±20%

R.H.) unless the standard condition(Temp.:25±3℃,Humidity :65±10% R.H.)

is regulated to measure.

5.2 Test Circuit

SMT CSTCC ZTTC 4.00 Mhz Ceramic Resonator

6 PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS

No Item Condition of Test

Performance

Requirements
6.1 Humidity Keep the resonator at 60℃±2℃ and 90%-95% RH for 96h. Then Release the resonator into the room Condition for 1h prior to the Measurement. It shall fulfill the specifications in Table 1.
6.2

High

Temperature

Exposure

 Subject the resonator to 85℃±2℃ for 96h, then release the resonator into the room conditions for 1h prior to the measurement. It shall fulfill the specifications in Table 1.
6.3

Low

Temperature Exposure

 Subject the resonator to -40℃±2℃ for 96h, then release the resonator into the room conditions for 1h prior to the measurement. It shall fulfill the specifications in Table 1.
6.4

Temperature

Cycling

 After temperature cycling of blow table was performed 5 times, resonator shall be measured after being placed in natural conditions for 1h. It shall fulfill the specifications in Table 1.
Temperature Time
–25±3℃ 30±3 min
85±3℃ 30±3 min
6.5 Vibration Subject the resonator to vibration for 2h each in x,y and z axis With the amplitude of 1.5mm, the frequency shall be varied uniformly between the limits of 10 Hz—55Hz. It shall fulfill the specifications in Table 1.
6.6

Mechanical

Shock

 Drop the resonator randomly onto a wooden floor from the height of 100cm 3 times. It shall fulfill the specifications in Table 1.

6.7

 Soldering Test

Components shall be measured after applying

twice of the re-flow soldering with following

temperature profile and leaving in natural

condition for 1 hour.

SMT CSTCC ZTTC 4.00 Mhz Ceramic Resonator

 It shall fulfill the specifications in Table 1.

6 PHYSICAL AND ENVIRONMENAL CHARACTERISICS

No Item Condition of Test

Performance

Requirements
6.8

Solder

Ability

 Dipped in 245℃±5℃ solder bath for 3s±0.5 s with rosin flux (25wt% ethanol solution.) The terminals shall be at least 95% covered by solder.
6.9 Board Bending

Mount a glass-epoxy board (Width=40mm,thickness=1.6mm),then bend it to 1mm displacement and keep it for 5s. (See the following figure)

 Mechanical damage such as breaks shall not occur.

Table 1

Item Specification after test

Oscillation Frequency Change

△Fosc/Fosc (%) max

 ±0.2
Resonant Impedance Ro(Ω)max. 35
The limits in the above table are referenced to the initial measurements.

7 RECOMMENDED LAND PATTERN AND REFLOW SOLDERING STANDARD CONDITIONS

7.1Recommended land pattern

7.2Recommended reflow soldering standard conditions

8．PACKAGE

To protect the products in storage and transportation,it is necessary to pack them(outer and inner package).

8.1 On paper pack, the following requirements are requested.

8.1.1 Dimensions and Mark

NO. Name Quantity
① Package 1
② Inner Box 10
③ Belt 2.9 m
④ Adhesive tape 1.2 m
⑤ Label 1
⑥ Certificate of approval 1
⑦ Company name ,Address etc.

8.1.2 Section of package

Package is made of corrugated paper with thickness of 0.8cm.Package has 10 inner boxes, each box has 1 reel(each reel for plastic bag)

8.1.3 Quantity of package

Per plastic reel 4000 pieces of piezoelectric ceramic part

Per inner box 1 reel

Per package 10 inner boxes

(40000 pieces of piezoelectric ceramic part )

8.1.4 Inner Box Dimensions

NO. Name Quantity
① Inner Box 1
② QC Label 1
③ Label 1

8.2 On reel pack, the following requirements are requested.

8.2.1 Reel Dimensions

φA φB W T Pieces per reel Carrier tape size
330±3 80min 16.4min 22.4max 4000typ. 16

8.2.3 Packing Method Sketch Map

8.2.4Test Condition Of Peeling Strength

9．EIAJ Monthly Code

2011/2013/2015/2017 2010/2012/2014/2016
MONTH CODE MONTH CODE
JAN A JAN N
FEB B FEB P
MAR C MAR Q
APR D APR R
MAY E MAY S
JUN F JUN T
JUL G JUL U
AUG H AUG V
SEP J SEP W
OCT K OCT X
NOV L NOV Y
DEC M DEC Z

10．OTHER

10.1 Caution

10.1.1 Don’t apply excess mechanical stress to the component and terminals at soldering. Do not use this product with bend.

10.1.2 Do not clean or wash the component for it is not hermetically sealed.

10.1.3 Do not use strong acidity flux,more than 0.2wt% chlorine content,in flow soldering.

10.1.4 Don’t be close to fire.

10.1.5 This specification mentions the quality of the component as a single unit. Please insure the component is thoroughly evaluated in your application circuit

10.1.6 Expire date (Shelf life) of the products is 12 months after delivery under the conditions of a sealed and an unopened package. Please use the products within 12 months after delivery. If you store the products for a long time (more than 12 months), use carefully because the products may be degraded in the solderability or rusty. Please confirm solderability and characteristics for the products regularly.

10.2 Notice

10.2.1 Please return one of this specification after your signature of acceptance.

10.2.2 When something gets doubtful with this specifications, we shall jointly work to get an agreement.

Product tags

3.58 mhz ceramic resonator

,

hc 49s smd crystal resonator

,

smd ceramic resonator
Send your message to this supplier
Send Now

SMT CSTCC ZTTC 4.00 Mhz Ceramic Resonator

Ask Latest Price
Product Detail
Brand Name :
HANSEJOHN
Model Number :
ceramic resonator 4.00Mhz ZTTCP4.00MG/PBRC4.00BR/CSTCC SERIES
Certification :
Rohs，ISO
Place of Origin :
wuxi
MOQ :
10000PCS
Price :
$0.2
Contact Supplier
SMT CSTCC ZTTC 4.00 Mhz Ceramic Resonator

hanse-john electronic Co.,Ltd.

Active Member
5 Years
jiangsu, wuxi
Since 2008
Business Type :
Manufacturer, Trading Company
Main Products :
SMD Filter, Ceramic Bandpass Filter, Ceramic Low Pass Filter
Total Annual :
400000-1000000
Employee Number :
100~200
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Ceramic Resonator
MachineU China Products Electrical Equipment & Supplies Industrial Controls Transformers
Contact Supplier
Submit Requirement