1. Introduction
The PoE Injector is a single port POE injector offer a compact and cost effective, It can convert standard 100~240V/AC power into low voltage.DC that runs over existing LAN cable to power up IEEE 802.3af&at compliant network accessories.
Remote powering of wireless LAN (WAN) access points, IP Security cameras, VoIP telephone an other low port density installations.
2. Product Features:
● Up to 30W of Power on 2-pairs
● Supports 100/1000 Base-T applications
● LED indicators for power input and PoE output
● Internal AC/DC converter no need for external power brick
● Easy plug-and-play installation
● Muti protection
3.Hardware Description
4.Application
Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fx devices such as APs, IP Cameras or P Phones, etc.
Steps:
1. Use a CATS UTP cable to connect port of Ethernet device to the DATA.
2. Connect A C cable with Injector and Socket.
3.Connect the PoE OUT port to a PD with CATS lJTP cable.
5. Specification
Item | Description |
No of channels | 1 |
Pass Through Data Rates | 100/1000Mbps |
Power over Output Ethernet output | Pin Assignment and Polarity:1/2 (-), 3/6 (+) Output Power Voltage: 50VDC User Port Power: 30W |
Input Power Requirements | AC input Voltage: 100 to 240 VAC AC Input Current 0.5A 100-240 VAC |
Dimensions | 145mm x 60mm x 40mm |
Indicators | System Indicator: AC Power User Indicator Channel Power |
Connectors | Shielded RJ-45, EIA 568A and 568B |
Protection | Over current protection Over load protection Over voltage protection Anti-interference protection |
Operating Ambient Temperature: | -10℃-40℃ |
Operating Humidity: | Maximum 85%, Non-condensing |
Storage Temperature | -10℃-60℃ |
Storage Humidity : | Maximum 90%, Non-condensing |