SMD Common Mode Line Filter for Signal and sensor lines
D Electrical Properties:
Properties | Test conditions | Value | Unit | Tol. | |
Inductance | 100 kHz/ 100 mV | L | 2x 1000 | μH | ±40% |
Impedance | Zmax | 3600 | Ω | typ. | |
Rated current | ΔT = 40 K | IR | 950 | mA | max. |
DC Resistance | RDC | 2x 0.180 | Ω | max. | |
Leakage inductance | 1 MHz/ 1 mA | LS | 5900 | nH | typ. |
Insulation test voltage | UT | 1000 | V (AC) | max. | |
Rated voltage | UR | 80 | V |
E General information:
It is recommended that the temperature of the part does not exceed 125°C
under worst case operating conditions.
•Ambient temperature: -40°C to +85°C (refering to IR)
•Operating temperature: -40°C to +125°C
•Storage temperature (on tape & reel): -20°C to +40°C; 75% RH max.
•Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently