Yamaha YV100II placement machine Simple mechanical structure to ensure durability and stability:

Simple mechanical structure, casting framework, ensure durability and stability,

Circuit control department is not complex, easy maintenance. DOS operating system

Menu is relatively simple, easy to operate, a working head, eight suction nozzle,

Can post the dimensions of the material, you can install precision camera

Improving placement accuracy. Theory at the rate of 14400 per hour,

Actual production capacity of around 8000 units, is suitable for small batch production.

1. The basic structure based on the reliability of the high speed machine
2. Support the protection of the components
3.0.25 seconds/CHIP installed at a high speed
4 can be installed 0.5 feet spacing QFP 32 mm
5. High speed image processing
6.2 the camera can reduce the time of production
7. The new design of high rigid frame
8. Increase the speed of the shaft
9. Can handle all kinds of components
10. The most suitable for computer SIMM production with 8 thread

SMT Advantage:
Surface mount technology, SMT and its associated surface mount devices, SMDs considerably speed up PCB assembly as the components simply mount on the board.
Look inside any piece of commercially made electronic equipment these days and it is filled with minute devices. Rather than using traditional components with wire leads like those that may be used for home construction and kits, these components are mounted onto the surface of the boards and many are minute in size.

1. Good mechanical performance under shock and vibration conditions. (Partly due to lower mass, and partly due to less cantilevering.)

2. Lower resistance and inductance at the connection; consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance.

3. Better EMC performance (lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the lesser lead inductance.

4. Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.)

5. Reasonable initial cost and time of setting up for mass production, using automated equipments.

Shenzhen letter surplus lung electronics co., LTD., dedicated to electronic manufacturers to provide SMT equipment as follows:

MPM printer, Koh Young SPI, Easa reflow soldering

Siemens placement machine, FUJI FUJI SMT machine, panasonic SMT machine

The AOI, lu Vitronics Soltec reflow soldering, non-standard automation equipment, SMT machine rental lease

The SMT production line equipment, and SMT components, SMT supplementary materials, services and solutions.