YAMAHA CP40 Power Buttom SMT Machine Spare Parts Test in machine before shipping:

Product Features:

① Simple structure in linear type, easy in installation and maintation;

② Adopting advanced word famous brand components in pneumatic parts, electric parts and operation parts;

③ High pressure double crank to control the die opening and closing;

④ Running in a high automatization and intellectualization, no pollution;

⑤ Apply a linker to connect with the air conveyor, which can directly inline with filling machine.

Product Advantages:

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

The main advantages of SMT over the older through-hole technique are:

1. Smaller components.

2. Much higher component density (components per unit area) and many more connections per component.

3. Components can be placed on both sides of the circuit board.

4. Higher density of connections because holes do not block routing space on inner layers, nor on back-side layers if components are mounted on only one side of the PCB.

Product Specification:

Supply Ability:

Supply new and used samsung spare parts for smt machine.

• CP30 Servo Amplifier (PU0A015EN21P00)
• CP60-DRIVER
• SAMSUNG CP DRIVER
• SAMSUNG CP20 (CP40, CP45) X DRIVER J3153007A PY0A030A1FH1P00
• SAMSUNG CP40 XY DRIVER
• SAMSUNG CP40 (CP45) Z DRIVER J3153024A PY0A015A1FD1P01
• Servov DRIVER
• SAMSUNG LASER & CAMERA
• 8001017
• Quad Align
• SA LASER
• SAMSUNG SM411 CCD VCC-G20E20
• SAMSUNG CP40 NOZZLE N40
• CP40 RGH22 X50D00 (RENISHAW)
• CP40Z-MOTOR P30B04005DXS0
• CP45 NEO ENCODER CABLE J90800114C
• CP45 Z motor MSMA5AZA5A
• CP45NEO VISION CARD
• CSMT－04BB1ABT3
• SAMSUNG CP40 MAIN BOARD
• SAMSUNG CP40 TECHING BOX J9060034B
• SAMSUNG MMC1
• SAMSUNG SM 8MM FEEDER CARD

Stock Advantages:

• Fuji Feeders are in large stock:

SMT Application:

Although it is possible to use some SMT components for home construction, great care is required when soldering them. Additionally even the ICs having a wide pin spacing may be difficult to solder.

Those with fifty or more pins cannot be soldered without special equipment. They are intended only for large scale manufacturing. Even when working on boards that have already been built great care is needed. However these SMT components offer great cost savings to manufacturers and this is why they have been adopted. Fortunately for the home constructor, traditional leaded components that can be soldered manually are still widely available and offer a much better solution for home construction.