NXT AIM XPF 56mm FEEDER FUJI W56 Smt Spare Parts Supply original new or used and repair service

Product Advantages:

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

The main advantages of SMT over the older through-hole technique are:

1. Smaller components.

2. Much higher component density (components per unit area) and many more connections per component.

3. Components can be placed on both sides of the circuit board.

4. Higher density of connections because holes do not block routing space on inner layers, nor on back-side layers if components are mounted on only one side of the PCB.

Specifications:

Supply Details:

Supply and repair all FUJI spare parts at low price:

• FUJI HOVER DAVIS 8MM FEEDER
• FUJI HOVER DAVIS 16MM FEEDER
• FUJI HOVER DAVIS 24MM FEEDER
• FUJI HOVER DAVIS 32MM FEEDER
• FUJI HOVER DAVIS 44MM FEEDER
• FUJI CP6 HIMV 134 CPU
• FUJI CP6 SCSI BOARD FSC30D
• FUJI CP642 (643) SERVO CARD IS70C
• FUJI CP642 (CP643) 4800 VISION CARD
• FUJI GL5 CPU BOARD VM1152A
• FUJI GL5 VISION CARD VM1710
• FUJI IP3 4800 VISION CARD
• FUJI QP2 PMC PCB K2091Z JZMMC-CP200A
• FUJI QP2 PMC PCB K20913 JZMMC-CP200A
• FUJI QP341 LIGHT ADJUSTMENT BOARD FH1107B0
• FUJI XP IO BOARD FH1249A

Related Parts:

SMT Application:

Although it is possible to use some SMT components for home construction, great care is required when soldering them. Additionally even the ICs having a wide pin spacing may be difficult to solder.

Those with fifty or more pins cannot be soldered without special equipment. They are intended only for large scale manufacturing. Even when working on boards that have already been built great care is needed. However these SMT components offer great cost savings to manufacturers and this is why they have been adopted. Fortunately for the home constructor, traditional leaded components that can be soldered manually are still widely available and offer a much better solution for home construction.