original JUKI 0402 40081759 CF05HPR Feeder 1 Month Warranty

Specifications:

Supply Details:

Sell & repair original new Juki feeder in an excellent condition:

• JUKI 700 FEEDER TROLLEY
• JUKI 2010 (2020) FEEDER TROLLEY
• JUKI 2050 (2060) FEEDER TROLLEY
• JUKI AF05HP FEEDER E1001706AB0
• JUKI AF16FS FEEDER E4003706AB0
• JUKI ATF FEEDER
• JUKI CF 8X4
• JUKI CF03HP
• JUKI CF05HP
• JUKI CF081E
• JUKI CF081P
• JUKI CN081C
• JUKI CTFR FEEDER
• JUKI FEEDER AF05HP E1001706AB0
• JUKI FEEDER AN081C E1009706AB0
• JUKI FEEDER CF03HPR 40081758
• JUKI FEEDER CF05HPR
• JUKI FEEDER CF8L1E
• JUKI FEEDER EF08HS
• JUKI FEEDER EF12FS
• JUKI FEEDER EF16FS
• JUKI FEEDER FF12FS E30037060B0
• HA005300010 JUKI MAGNETIC CONTACTOR
• JUKI 40024285 LM GUIDE X-Y (10M) SET
• JUKI 40024338 S HOUSING ASM
• ESR14075100 JUKI CONVEYOR MOTOR 25W
• SM6020552TP JUKI BOLT M2 L=5
• ESR14065100 JUKI CONTOROLLER RESET SWITCH
• E25157150A0 JUKI HEAD R SIDE PLATE ASM.
• HD002600010 JUKI SENSOR (HPF-S359-K)
• E3054802000 JUKI HEAD REAR COVER
• L842E2210A0 JUKI CP6 INPUT CABLE ASM
• E6166715000 JUKI COMPRESSION SPRING B
• L875E521000 JUKI FLAT BEZEL 25MM
• E95157250A0 JUKI F OPEN SET SW RELAY CABLE ASM.
• E2204998000 JUKI NOZZLE 5 (G175)
• E95597250A0 JUKI ENCODER CABLE ASM.
• E2075725000 JUKI SAFETY BAR
• L870E421000 JUKI DYNAMIC CONNECTOR 4 POLES
• JUKI 40026594 FB SENSOR MOUNTING BRK
• E13307060A0 JUKI CAM ASM.

Product Advantage:

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

The main advantages of SMT over the older through-hole technique are:

1. Smaller components.

2. Much higher component density (components per unit area) and many more connections per component.

3. Components can be placed on both sides of the circuit board.

4. Higher density of connections because holes do not block routing space on inner layers, nor on back-side layers if components are mounted on only one side of the PCB.

Stock Adequate: