Used JUKI 2070 SMT Mounter Machine High Speed Led Pcb Production Line

Juki Ke-2070 Pick And Place Machine High Speed Led Pcb Production Line

SMT Machine JUKI 2070 LED Pick And Place Machine Production power supply

JUKI full-automatic second-hand mounting machine KE-2070 six-head mounting machine

SMD LED or lens Pick And Place Machine Juki KE-2070 M substrate 330×250mm

Stable Performance SMT Pick And Place Machine For LED Lighting Factory Used Juki

High Speed SMT Assembly Machine / Pick And Place Machine For Lighting Factory

High Accuracy SMD JUKI KE-2070 high speed Pick and Place Machine 0.155 sec/chip

Shenzhen Wanbo High-tech Co., Ltd. has long introduced second-hand JUKI placement machines, the company specializes in SMT equipment: placement machines, plug-in machines, SMT peripheral equipment; Accessories: Feida, suction nozzle, JUKI laser head, CPU motherboard sub-CPU board, drive board X/Y/Z/T axis drive, headboard, image control card, I/O board, JUKI servo motor, camera, display touch screen, servo motor, etc.;

When you change the OS information, you have to restart this machine after updatingthe drive C

1.A UPS is incorporated into this machine to protect a production program and any otherdata at power failure.
To prevent a battery built into the UPS from degrading, do not leave this machine withoutturning it on for six months or longer.

CAUTION

Safety cover
1.When opening/closing the safety cover, pay attention to the following items.

CAUTION

1.Do not step onto the machine during setup or similar operation because it may damagethe cover or other parts.

Should the machine not operate properly due to any operation above, replace yourSSD or HDD with a new one, and so your data may be lost.
When you change the OS information, you have to restart this machine after updatingthe drive C.
Only when the main circuit breaker and main switch are set to ON, this machine isassumed to be turned on.

When opening the cover, push up the cover until it is locked and release it afterconfirming the locked status.
If the cover is released in a non-locked status, it may fall.
When closing the cover, release the locked status and then close the cover.
During a release operation, take care not to get hurt due to falling of the cover.)

Accessories include: all kinds of original, domestic nozzles, FEEDER, boards, lasers, solenoid valves, inductors,

cylinders, tank chains, etc.), laser maintenance, board maintenance and so on.