Used JUKI SMT Assembly Machine With A Theoretical 23300 Points Per Hour

JUKI KE-2070 Pick And Place Machine with a theoretical 23300 points per hour

JUKI KE-2070 equipped with 6 standard SMD heads Element height 6mm specifications
JUKI KE-2070 Pick And Place Machine Remote technical support of equipment
Multifunctional SMT Placement Machine 6 Heads For LED Power Driver / IC Chip

Shenzhen Wanbo High-tech Co., Ltd. has a JUKI senior engineer team with rich maintenance experience, specializing in providing JUKI series placement machine software and hardware maintenance and troubleshooting. It mainly includes JUKI laser head, CPU motherboard SUB-CPU board, drive board X/Y/Z/T axis driver, head board, image control card, I/O board, JUKI servo motor, camera, display touch screen, servo motor and other maintenance and replacement services. The company's fees are reasonable, the warehouse accessories are sufficient, the maintenance cycle is short, the one-time repair success rate is high, and the Pearl River Delta region can provide door-to-door installation, commissioning, maintenance and maintenance.

Operation manual I
Step 2 Warm up the machine.
lf you warm up the machine before PWB production, the machine can start PWBproduction stably.
①Select the
button
from the main screen.

② The "Warming-up" screen appears. Make the settings for the warming-up
conditions.
Select what to be warmed up.
Select the warming-up conditions.
Enter the time duration when themachine stops, the number of timesthe machine stops or the temperatureat which the machine stops.
* Refer to Section 2.4 "WarmingUp" of the "Instruction ManualCD" for details of the
"Warming-up" screen.

③ Check to see if the safety cover is closed, and press the <START> switch of theoperation panel.
Press the <START> switch.
The axes and the conveyor start movingand the warming up operation starts.
To finish the warming-up operation,press the <STOP> switch.

Operation panel
(When you select the <Time> (Count) button, thewarming-up operation finishes when the specifiedtime passes or when the number of times the
machine warms up reaches the specified value.)

WARNING
When you press the <START> switch, the machine starts moving.To avoid risk of injury, never put your hand or head inside the
machine

Accessories include: all kinds of original, domestic nozzles, FEEDER, boards, lasers, solenoid valves, inductors,
cylinders, tank chains, etc.), laser maintenance, board maintenance and so on.