Offer SMT JUKI 40091553 ELECTRIC FEEDER EF32FS for Surface Mounted Technology

Specifications:

Supply Ability:

Sell & repair original new Juki feeder in good quality:

• JUKI 700 FEEDER TROLLEY
• JUKI 2010 (2020) FEEDER TROLLEY
• JUKI 2050 (2060) FEEDER TROLLEY
• JUKI AF05HP FEEDER E1001706AB0
• JUKI AF16FS FEEDER E4003706AB0
• JUKI ATF FEEDER
• JUKI CF 8x4
• JUKI CF03HP
• JUKI CF05HP
• JUKI CF081E
• JUKI CF081P
• JUKI CN081C
• JUKI CTFR FEEDER
• JUKI FEEDER AF05HP E1001706AB0
• JUKI FEEDER AN081C E1009706AB0
• JUKI FEEDER CF03HPR 40081758
• JUKI FEEDER CF05HPR
• JUKI FEEDER CF8L1E
• JUKI FEEDER EF08HS
• JUKI FEEDER EF12FS
• JUKI FEEDER EF16FS
• JUKI FEEDER FF12FS E30037060B0
• JUKI FEEDER Storage Cart
• JUKI FF05HP
• JUKI FF8X4
• JUKI FF12FS FEEDER E30037060B0
• JUKI FF12FS FEEDER
• JUKI FF16NS FEEDER
• JUKI FF16FS FEEDER
• JUKI FF16MM FEEDER
• JUKI FF24FS FEEDER
• JUKI FF24MM FEEDER
• JUKI FF32 44mm feeder
• JUKI FF32FR-OP E6000706RBC
• JUKI FF32FS FEEDER
• JUKI FF44FR FEEDER
• JUKI FF44FR-OP FEEDER E7000706RBC
• JUKI FF44FS
• JUKI FF44MM FEEDER
• JUKI FF56FR-OP FEEDER
• JUKI FF56MM FEEDER
• JUKI FF081E FEEDER
• JUKI FF121S FEEDER E30007060B0
• JUKI NF 8MM FEEDER
• JUKI NF12FS FEEDER
• JUKI NF72MM FEEDER
• JUKI SFN1AS E00107190A0
• JUKI NF16FS FEEDER
• JUKI NF24FS FEEDER
• JUKI NF32FS FEEDER
• JUKI SFN2AS FEEDER E00207190A0
• JUKI SFN3AS FEEDER E00307190A0
• JUKI STICK FEEDER E70007160A0
• JUKI VIBRATION STICK FEEDER COPY
• JUKI VIBRATION STICK FEEDER SF70ES E70007160A0
• JUKI VIBRATION STICK FEEDER

Product Advantages:

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

The main advantages of SMT over the older through-hole technique are:

1. Smaller components.

2. Much higher component density (components per unit area) and many more connections per component.

3. Components can be placed on both sides of the circuit board.

4. Higher density of connections because holes do not block routing space on inner layers, nor on back-side layers if components are mounted on only one side of the PCB.

Stock Adequate: