Anti - Corresion Juki Spare Parts JUKI 3010 3020 OCC Camera L Cable ASM 40092466

Specifications:

Stock Details:

Sell & Buy Smt Machine And Spare Parts.
Supply all JUKI Spare Part at lower Price:

• E4310760000 JUKI GUIDE PLATE A
• JUKI 40010679 EJECTOR UNIT IC
• E96257800A0 JUKI M HEAD SENSOR CABLE ASM
• E4634760000 JUKI FINGER B 2
• JUKI 40046509 DIFFUSER U
• E2227723000 JUKI HANDLE SH
• E11067170A0 JUKI X CARRIER BASE ASM.
• E1004760000 JUKI PS DRAW PLATE
• E5335706000 JUKI TAPE GUIDE ROLLER 24
• S9622710000 JUKI MICRO FLOPPY DISC DEVICE
• E2004721000 JUKI RAIL STAND R
• E2170729000 JUKI X AXIS PLASTIC RAIL (40)
• E9244729AA0 JUKI Z/THETA FAN RELAY CABLE ASM.
• JUKI 40116345 R PICK DETECTION EMISSION SENS 2 A
• JUKI 40132731 BOX_UP_SUPPORT
• E92917150A0 JUKI YR ORIGIN CABLE 2 ASM.
• HX00354000F JUKI BOARD PARTS (FX-1)
• E3678729000 JUKI NOZZLE SLIDER 510
• E95807250A0 JUKI TRACK BALL RELAY CABLE ASM.
• JUKI 40011419 DUSTPROOF COVER HC
• E9237729HA0 JUKI AC SERVO +15V CABLE ASM.
• E4652760000 JUKI RAIL

Relative Pictures:

Related Supply:

Disadvantages:

• 1. Small errors in component placement are corrected automatically as the surface tension of molten solder pulls components into alignment with solder pads. (On the other hand, through-hole components cannot be slightly misaligned, because once the leads are through the holes, the components are fully aligned and cannot move laterally out of alignment.)
• 2. Better mechanical performance under shock and vibration conditions(partly due to lower mass, and partly due to less cantilevering)
• 3. Lower resistance and inductance at the connection, consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance.
• 4. Better EMC Performance(lower radiated emissions) due to the smaller radiation loop area(because of the smaller package) and the lesser lead inductance.
• 5. Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.)

SMT Applications:

Although it is possible to use some SMT components for home construction, great care is required when soldering them. Additionally even the ICs having a wide pin spacing may be difficult to solder.

Those with fifty or more pins cannot be soldered without special equipment. They are intended only for large scale manufacturing. Even when working on boards that have already been built great care is needed. However these SMT components offer great cost savings to manufacturers and this is why they have been adopted. Fortunately for the home constructor, traditional leaded components that can be soldered manually are still widely available and offer a much better solution for home construction.