Professional SMT supplier six head SMT SMD LED pick and place machine for SMT Production Line
The HW-DU800-96F is our most popular model with Vision. The HW-DU800-96F offers technologically advanced features with 400mm x 700mm work area, 96 single feeder positions (up to 120 feeders using bank feeders) where quick setup, easy of operation and high reliability are paramount.
System Features
* The highest quality with the most advanced equipment at a cost-effective solution
* Placement rates up to 13000 cph
* Accurately places a wide range of components including 0201, 0402, LED, BGA, QFN...
Components
The HW vision System assist allows accurate placement of 0201, BGA, QFN, QFP,LED and a wide range of virtually all SMT components.
Vision System
The HW-series vision pick and place systems is easy to programming for all operators, Intelligent and fast to operation
Feeders
NXT Electricial feeder were adopted, sizes include 8mm, 12mm, 16mm, 24 mm, 32mm and 44mm.
Number of feeders
|
50
|
Number of IC tray
|
6
|
Number of cameras
|
6
|
Number of heads
|
4
|
Average power
|
400W
|
Positioning precision
|
0.01MM
|
The buffer range of suction nozzle
|
4.5MM
|
Power supply
|
220V, 50/60Hz
|
Compressed air
|
0.5-0.6Mpa
|
Drive motor
|
Panasonic servo motor
|
Vacuum source of suction nozzle
|
high-speed on-off vacuum generator with vacuum breaker
|
Maximum circuit board area
|
600X455mm
|
Maximum travel scope in Z axis
|
20MM
|
Tape feeder
|
8, 12, 16, 24mm and vibration suction (mounting pipe chip)
|
Maximum mounting speed
|
7000Pcs/H
|
Average mounting speed of actual mounting resistance
|
8000Pcs/H
|
XYZ drive guide rail
|
TBI high-precision reloading linear guide rail
|
Motion drive system
|
Panasonic high-speed DSP drive
|
Operating system
|
full-automatic chip mounter operating system independentlydeveloped by Huawei Guochuang based on Windows
operating systemand it supports windows xp
win7 operating system
|
Element angle
|
0-360°, synchronous rotation during movement
|
X/Y operation mode
|
intelligent curve of the linear acceleration and deceleration linkage
|
MARK point positioning
|
full-automatic (the MARK point can be adjust at will)
|
Intelligent alarm
|
automatic correction, automatic filling, feeding shortage alarm
|
Plate entering mode
|
automatic connection from left to right in single sectionsautomatic PCB transfer positioning. /plunger positioning
manual plate feeding.
|
Visual display
|
17-inch industrial control display, 4:3, resolution: 1280 x1024
|
Number of recognition cameras
|
One Mark recognition camera, four quick-recognition cameras and one precise-recognition camera
|
Adaptive mounting scope
|
Adaptive to 0201, 0402, 0603, 0805, 1206, diode, audion, SOT, QFPwithin 40*40mm and the pin distance ≥0.3mm
(0.5mm center distance) and BGA
|
Product weight
|
280KG
|
Dimension
|
900X1140X1340mm
|