ET-1200 Semi-automatic stencil printer
Technical Parameter:
Standard semi-automatic high-precision stencil printing | |
Printing area | 1200×250 mm |
Plate Area | 1250×300 mm |
Stencil Frame Size | 470×370 mm~1300×550 mm (L×W) |
Positioning way | positioning pin |
Scraper Speed | 0-100 mm/sec |
Power | 220V single phase, 50/60 HZ |
Power Consumption |
120 W
|
PCB plate thickness | 0.2-2.0 mm |
Plate Trimming | Front/back +/- 10mm Right/Left +/- 10mm |
Printing Precision |
+/- 0.05 mm
|
Air supply | 5-7 KGF/cm2 |
Weight | 360 kg |
Dimension | (L)1600 x(W)900 x(H)1650 mm |
Features:
(1) speed regulating motor drives scraper, combining with precision linear guide rail, to ensure the printing accuracy;
(2) the printing scraper can be fixed upward by rotating 45 degrees, and the printing plate and scraper can be cleaned and replaced;
(3) the scraper holder can be adjusted back and forth to select the appropriate printing position;
(4) composite printing plate, with fixed groove and positioning pin, easy installation and adjustment, suitable for single and double-sided printing;
(5) it is convenient and quick to move the plate calibration mode of steel bar mesh and adjust with printing machine (PCB) XYZ.
(6) unidirectional and bidirectional multi-printing mode can be set.
Our Services
1. offer detail manual user .
2. customer to our factory study and training .
3. offer overseas service : can send engineers
4. to customer factory for install