Automatic Pcb Paste Printing Smt Printer For Pcb Solder Paste Printing

ET-F1500 automatic stencil printer

Stencil printer printing process

Printing is a hydrodynamic-based process that can be held over and over again to apply a fixed amount of material (solder paste or glue) to the surface of the PCB

In general, printing is a very simple process. The PCB is kept at a certain distance or in full contact with the steel plate or the wire mesh.

The material flows under the action of the blade and flows over the surface of the steel plate or the wire mesh, and fills the upper surface of the cutting plate. So that the material sticks to the surface of the PCB, and finally separates the PCB from the screen or steel plate, leaving an image of the material on the PCB.

In the solder paste printing process, the substrate is placed on a table and clamped by mechanical or vacuum.

ET-F1500 is the automatic stencil printer

ET-F1500 can apply to automatic smt production line, forsave labor and money.

ET-F1500 Parameters

1. Machine Dimensions: 2500(L)X1200(W)X1500(H)mm

2. Machine Weight: Approx:1800Kg

3. Air Required: 4.5~6Kg/cm2

4. Power Input: AC:220±10%,50/60HZ 1Φ 3KW

5. Control Method: PC Control

6. Repeat Position Accuracy: ±0.015mm

7. Cleaning System: Dry,Wet,Vacuum (Programmable)

8. Squeegee Angle: 60°/55°/45°

9. Squeegee Speed: 6~200mm/sec

Screen frames

1. The min size is 1100*300 mm

2. The max size is 1800*750 mm

3. The thickness is 25-40 mm

PCB size

1.The max pcb size is 1500*350 mm

2.The min pcb size is 80*50 mm

3.The pcb thickness is 0.4-6 mm

4.The pcb warpage <1%

Transport

1.Transport height is 860-940 mm

2.Transport direction support left-right, right-left, left-left, right-right

3.The Max transport speed is 1500 mm/s programmable

PCB location

1.The support system is magnetic pin/up-down table adjusted/supportblock

2.The clamping system is side clamping, vacuum nozzle

Company profile

ETON Automation Equipment Co. LTD located in Shenzhen, China, which is set up in 2011. Focusing on the placement machine industry, there are independent production departments, R&D team, sales team and after-sales service department. There are three offices in China, namely Shenzhen, Zhongshan and Hangzhou. There are also offices in Delhi and Mumbai, India.

Our company is an international development company for global customers. Our placement machines are exported to more than 20 countries and have been well received all over the world. Such as USA,KOREA,GERMANY,EGYPT,TURKEY,VIETNAM,TUNISA

And so on.