Pick and Place Machine JUKI JX-100 JUKI Assembly Line SMT Machinery

The JUKI JX-100 pick and place machine is a high-speed and high-precision machine used for electronic component placement on printed circuit boards (PCBs). It is suitable for small to medium-sized production runs and offers advanced features for efficient and accurate component placement.

Specification:

Name: JUKI JX-100
Brand: JUKI
Model: JUKI JX-100

Condition: original
Quality: top qualiy
Stock: large
Warranty: 1 year
Delivery: fedex,ups,dhl,as required
Package: wooden case

Placement Accuracy: Laser Alignment (chip placements) (±50μm) at +/- 3 Sigm
BOARD SIZE: Min.50x50～Max.800x360mm
Component Height: 12.0mm
Component Size: Min.(0201 inch)0603mm～ Max.33.5mm
PLACEMENT SPECS| Placement Speed (chip): | IPC9850: 15,300CPH
FEEDER INPUTS: 60 single 8mm Tape Feeder

Some key features of the JUKI JX-100 pick and place machine include:

1. High-speed placement: The machine can place components at speeds of up to 50,000 CPH (components per hour), allowing for fast production times and high output rates.

2. High-precision placement: The JX-100 is equipped with advanced vision systems and laser alignment technology to ensure accurate component placement within tight tolerances.

3. Large component range: The machine is capable of placing a wide range of components, including resistors, capacitors, ICs, and LEDs, with sizes ranging from 01005 to 45x45mm.

4. User-friendly interface: The JUKI JX-100 features a user-friendly interface with intuitive software that allows for easy programming, setup, and operation.

5. Flexible feeder options: The machine supports various feeder types, including tape, stick, and tray feeders, to accommodate different component types and production requirements.

6. Automatic nozzle exchange: The JX-100 is equipped with an automatic nozzle exchange system, allowing for quick and easy nozzle changes to accommodate different component sizes.

To use the JUKI JX-100 pick and place machine, operators first need to program the machine with the placement data for the PCB. This can be done using the machine's software interface, where users can specify component placement coordinates, orientations, and other parameters.

Next, operators need to load the components onto the machine's feeders and set up the PCB on the machine's worktable. The machine will then automatically pick up components from the feeders using its precision nozzles and place them onto the PCB according to the programmed data.

Operators should regularly monitor the machine during operation to ensure proper component placement and make any necessary adjustments. After the placement process is complete, operators can inspect the PCB for accuracy and quality before moving on to the next production step.

Overall, the JUKI JX-100 pick and place machine is a versatile and efficient solution for electronic component placement in PCB assembly, offering high-speed performance, high-precision placement, and user-friendly operation.

Photo show