Jaguar High Speed Chip Mounter for SMT Production Line

[technical parameters]

Number of feeders:64pieces

Number of mounting head:6head

Number of pallets:6pieces

Average power:500W

positioning accuracy:0.01mm

Nozzle buffer range:4.5mm

Power Supply:220V, 50Hz

Compressed air: 0.5-0.6Mpa

Drive motor: Panasonic servo motor /HW-QiGn stepper motor

Identification mode: six head synchronous identification

Suction nozzle vacuum source:High speed on-off vacuum generator with vacuum destruction

Maximum board area:625×455mm XY

Maximum range of motion:629×679mm Z axis maximum range:20mm

Belt feeder: 8, 12, 16, 24mm and vibration feeder (can be attached to the chip)

Maximum theory speed: 15000 Pcs/ hours LED,

Resistance capacitance actual patch speed: 12000 Pcs/ hours

Hybrid visual mount average patch speed: 8500Pcs/ hours

XYZ drive rail: TBI high precision heavy duty linear guide rail.

Motion drive system: Panasonic AC servo -A6

Driver Operating system: Based on the Windows operating system, China JAGUAR record company independent research and development automatic placement machine operating system, support Windows XP, win7 operating system

Component angle: 0-360 degrees at any angle, the movement of synchronous rotation X/Y

Mode of operation: QiGn-2017 version of intelligent curve acceleration and deceleration linkage system

MARK point positioning: automatic scanning (can be arbitrarily set MARK points)

Intelligent alarm: automatic correction, Automatic patch, lack of material alarm

Into the plate mode: single segment from left to right transmission, can be connected to the automatic connection platform system, automatic PCB transmission positioning. Thimble positioning, manual release plate.

Visual display: 17 inch industrial control display ratio 4:3 resolution 1280x1024

Programming mode: peer to Peer programming, visual programming, PCB file import, etc.

Optimization mode: three automatic optimization modes (including V2017 intelligent optimization)

To identify the number of cameras: a Mark recognition camera, six high speed identification camera, a high resolution precision recognition camera

Applicable scope:adapt 0402, 0603, 0805, 1206, two tubes, transistors, SOT, and 40*40mm in the range of pin spacing is greater than or equal to 0.3mm (0.5mm from the QFP BGA pin center), etc..

Product weight:500KG Size (length and width): 1450*1370*1350mm (without display and keyboard)