Seamless softgel machine MD3 Pulsant-cutting type soft capsule dripping Round Shape softgel capsule Without mold

Model MD-3 seamless softgel machine consist of medicine supply,gelatin preparation,pulsnat cutting,cooling oil circulation,refrigerating,capsule shaping system. By adoption of advanced pulsant cutting technology,high dosing accuracy and capsule quality are quaranteed. Compared with normal soft capsule encapsulation machine,this machine can produce round shape capsule without expensive mold. Besides, there is no waste of gelatin.

Model MD-3 seamless softgel machine is developed based on advanced pulsant-cutting type soft capsule dripping machine,embraced with latest technologies. The output rate is higher,up to 54000 pics/hour in the term of capsule diameter varies from 2-10, and capsule dosage around 5-20 mg. The good quality yield no less than 98%.

Introduction about New Generation Seamless Softgel Machine

New generation seamless softgel machine is developed base on imported technology – impulse cutting technology. Its production has been more than 20 years till now. The difference with domestic softgel dropping machine are as below:

1. High production speed and high finished product ratio.
2. Can produce softgel with more sizes, size adjustment is convenient.
3. Dropper will not be blocked, dropping process is smooth.
4. Fill quantity difference of softgel is lower than requirement of pharmacopeia, steady and fewer fluctuation
5. On the basis of combining foreign new technology, we have done many improvement and upgrade according to the actual requirement of softgel dropping pill production which push softgel dropping pill production into a phase of high mechanization and automation. As consequence the dropped softgel can be dried and shaped directly in the tumble dryer. This advantage is incomparable for other softgel dropping machines.
6. To compare with die roll type softgel machine, the product of softgel dropping machine have thinner skin, and the cost is lower because it can use residual gelatin from die roll machine production, and dropping production does not need expensive die rolls. In addition, the softgel dropping pill is easier for swallow.
7. Has distinct advantage for small diameter softge production.