light yellow oil biological ester PVC plasticizer which can replace DOP and environment friendly
Description:
DOP is colorless transparent liquid,water-insoluble, soluble in most organic solvent and hydrocarbon.It has favorable compatibility with most industrial resin and partial compatibility with cellulose acetate and polyvinyl acetate.
DOP OIL Application:
Dioctyl Phthalate/ DOP products is the most popular plasticizer,It can be used in the processing of various kinds of soft PVC products, vinyl chloride copolymer andthe resin of the fiber, such as film,sheet plate, artificial leather, cable, molded plastic and so on. It also has a good softening effect in a variety of synthetic rubber.
Specification:
TYPICAL PHYSICAL-CHEMICAL PROPERTIES | |
Appearace | Transparent light yellow oily liquid |
Chroma(Pt-Co)# | ≤40 |
Acid value mgKOH/g | ≤0.3 |
Heat Loss(125 oC,2 h), % | ≤0.5 |
Density,(20°C, g/cm3) | 1.08-1.11 |
K Viscosity(cst,40 oC) | ≤50 |
Flash Point, oC | ≥190 |
Storage:
Handling: Provide adequate ventilation and keep away from spark, excessive heat and ignition source. Storage: Keep container tightly closed in a dry and well-ventilated place.
The storage temperature should be lower than 45°C, the viscosity will be increased significantly when the temperature fall below 15°C, if the temperature lower than 5°C, it would become creamy solid and can recovered to normal appearance while the temperature is restored to 25-40°C.
Quality standard
The product meets GB/T 5761-2006 standard with its physical and chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value ,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other index ,requirement ,on thermal stability.