Hydraulic Drilling Rigs
SINOWAY SWDH89A Hydraulic Top-hammer drill rig, and is the ideal choice for surface mining or pre-split drilling in large quarries or open pit mines and construction sites. It is easy to transport and set up at almost any kind of site. The drill rig is operator friendly and thanks to easily accessible service points – very easy to maintain.
Highlights
Equipped with Cummins engine, turbo charge, and the air compressor and hydraulic pump are directly connected to egine to ensure maximum transmission of power and minimization of energy loss.
Hydraulic rock drill with independent intellectual property rights own the shanks rebound energy absorption debice.The working life of drill tools can be guaranteed;Machine reliability has stood the company strengthened test and jobsite application ordeal.
The floating hinged undercarriage allows for 10 degree adaptive floating,a nd a maximum gradeability of up to 30 degree give them extremely good rough terrain capacity.
An automatic drill rod chamber equipped with bionic manipulator, where the drill rods are arranged like a turnable when the rig rotates, enabling the extension and removal of drill rigs through a mere handle, which greatly reduces the operating difficulty and improves the efficiency and reliability. The rotation and feed in the extension and removal of drill rods are adaptively controlled through hydraulic pressure,which reduces the wear of threads on the drill rods and thus improve their service life.
The cooling system has two radiators,which enable the air conditioner and the hydraulic oil to dissipate heat separately, even at a teperature close to 50 degree.
Operation Parameter | |
Hole range | 76 - 115mm |
Drill rod diameter | T45 |
Drill rod length | 3.66m x 6m |
Max. hole depth | 20m |
Air Compressor | |
Model | CF128R |
Working pressure | 0.8MPa |
Free air delivery | 8.3m³/min. |
Engine | |
Model | QSB6.7 |
Power | 164kw |
Speed | 2200rpm |
Fuel tank capacity | 350L |
Feed | |
Length of drill rig | 8000mm |
Feed length | 5000mm |
Feed extension | 1200mm |
Pitch angle | 140° |
Overturn angle | -20° - + 90° |
Max. feed rate | 0.8m/s |
Feed force | 25KN |
Lifting force | 35KN |
Boom | |
Total boom length | 2800mm |
Lifting angle | +45° - -30° |
Swing angle | 15° (L) - 55° (R) |
Travelling | |
Travel speed | 3.5/2.0km/h |
Max. traction force | 100KN |
Hill climbing ability | 25° |
Traction oscillation | ±10° |
Ground clearance | 400mm |
Hydraulic Rock Drill | |
Model | DF600S |
Impact power | 20kw |
Rotary speed | 90 - 180rpm |
Rotary torque | 1000Nm |
Dimensions | |
Gross weight | 15000kg |
Transportation state (L x W x H) | 11 x 2.92 x 3.35m |
Working state (L x W x H) | 8.4 x 2.92 x 9.15m |